MPI Technologies 2100 manual Emulation

EMULATION

Defines the type of IPDS printer to emulate. Range:

3812

3816

4028

Default:

4028

DEFAULT CODEPAGE

Defines which codepage to use as printer default. Range:

1..65534 (0xFFFE). Validated when the ppd line opens. Default:

500

REPORT MARGINS TO SYSTEM

Defines whether the margins should be reported in the OPC reply or not. If not, the entire page is reported as the printable area.

Range:

YES, NO.

Default:

NO

VPA CHECK

Defines which margins should be used to determine the existence of a VPA exception condition, which must be reported to the system.

Range:

MARGINS PHYSICAL PAGE IPDS LOGICAL PAGE NONE.

Default:

PHYSICAL PAGE

Note: VPA CHECK=MARGINS will be changed to PHYSICAL PAGE if the margins are not reported to the system.

PRINT OFFSET X

Defines X-offset to move the output print position. The value is defined in 300 dpi dots.

Range:

-999..999 Default: 0

PRINT OFFSET Y

Defines Y-offset to move the output print position. The value is defined in 300 dpi dots.

Range:

-999..999 Default: 0

ADD MARGINS

Defines whether the printable area margins should be added to the IPDS LPP (Logical Page Position) or not.

7