Connect Your Cable, Satellite or RF Antenna Coax Connection to the PowerMount
1)Connect the coax cable from your cable or satellite service or RF antenna to the coax input labeled “IN” on the PowerMount.
2)Connect a second coax cable from the terminal labeled “OUT” on the PowerMount to the coax input on your TV.
NOTE: If not routing other AV cables through the mount, route the coax cable to your TV through the mount’s cable management system. See above.
�������������
�������������
������ ������
��� ��
| Coax Cable |
| IN from Wall, |
| Cable Box, |
| Satellite or |
Coax Cable | Antenna |
OUT to TV |
|
22