Micro Technic PV-1075-CAR user manual Description, Block Diagram

Page 5

Users Manual & Installation Guide

PV- 1075: NIMH BATTERY PACK WITH CHARGER

Description

Micronix PV-1075 is a back-up module with Nickel-Metal-Hydride batteries and integrated charger. PV-1075 is designed to support the Micronix PV-5127, a high power PC/104 UPS power supply.

Micronix PV-1075 is a high capacity battery pack for your PC/104 system. An integrated timer controls the charging modes: standard charge and trickle charge. This timer also has the purpose to avoid overcharging.

PV-1075 will withstand extended temperatures and the shock and vibration of mobile equipment. PV-1075-CAR is a special version which can be used in mobile application. This version can be operated from a 12V car battery.

Block Diagram

 

￿￿￿￿￿

 

 

￿￿￿￿￿￿￿￿￿

 

 

￿￿￿￿￿

 

 

￿￿￿￿￿

 

 

￿￿

 

 

￿￿

￿￿

￿

￿￿

 

￿

 

 

Micronix PV-1075 is a PC/104 module that contains a NiMH battery pack, a timer controlled charger and four connectors.

The battery pack is secured to the PCB by a fastener and electrically connected to the PCB by a two pole connector. The battery is equipped with a polymer fuse that will disconnect the battery in case the battery temperature becomes too high.

Page 5 of 9

Image 5
Contents Micronix PC/104 Power Supply Table of contents Revision number Reason for change Date Revision historyOrdering codes AccessoriesGeneral information Description Block DiagramOutput connector KL1 ConnectorsInput connector KL2 Battery connector J1 Battery chargerPC/104 connector CN1 Charging indicatorsMains input Technical dataMechanical layout