Minuteman UPS UPS user manual Important Safety Instructions

Page 3

English

Thank you for purchasing a MINUTEMAN power protection product. It has been designed and manufactured to provide many years of trouble free service.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS !

Please read the manual before installing your SmartSine UPS. It provides the information that should be followed during installation and maintenance of the UPS and the batteries allowing you to correctly set up your system for the maximum safety and performance. Included is information on customer support and factory service if it is required. If you experience a problem with the UPS please refer to the Troubleshooting guide in this manual to correct the problem or collect enough information so that the MINUTEMAN Technical Support Department can rapidly assist you.

This symbol indicates "ATTENTION"

This symbol indicates "Risk of Electrical Shock"

NOTICE: This equipment has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules and the Class B

limits for radio noise emissions from digital apparatus set out in the Radio Interference of the Canadian Department of Communications.

These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates and uses radio frequency and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, this equipment may cause interference to radio and television reception. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

2

Image 3
Contents Page English Important Safety Instructions Materials Authorized Service Personnel onlyFront Panel SWF Front Panel IndicatorsRear Panel Installation PlacementConnecting Your Equipment InstallationCommunications Port Connection Optional Connecting the UPS to AN AC SourceChecking the Site Wiring Fault Charging the BatteryDIP Switch Settings Turning the Unit ON/OFFSelf Test LOW Battery Warning Alarms On BatteryUPS Fault Replace BatterySymptom Possible Cause What To Do Authorized Service Personnel only Replacing the BatteryBattery Replacement Procedure English If the UPS Requires Service Model Number EPO Customized Output Receptacle Panels Limited Product Warranty Limited Product Warranty Declaration of Conformity 224 PN 34000196 Rev