!
!Relocate the computer with respect to the receiver
!Move the computer away from the receiver
!Plug the computer into a different outlet so that the computer and receiver are on different branch circuits.
!Shielded communications interface cables must be used with this product.
WARNING: Changes or modifications to this unit not expressly 
approved by the party responsible for compliance could void the user's 
authority to operate the equipment.
Receiving Inspection
English
After removing your MINUTEMAN UPS from its carton, it should be inspected for damage that may have occurred in shipping. Immediately notify the carrier and place of purchase if any damage is found. Warranty claims for damage caused by the carrier will not be honored. The packing materials that your UPS was shipped in, are carefully designed to minimize any shipping damage. In the unlikely case that the UPS needs to be returned to MINUTEMAN, please use the original packing material. Since MINUTEMAN is not responsible for shipping damage incurred when the system is returned, the original packing material is inexpensive insurance. PLEASE SAVE THE PACKING
MATERIALS!
WARNING: Risk of electrical shock. Hazardous live parts inside |
this power supply are energized from the battery even when the AC |
input power is disconnected. |
To
1.If the UPS is on press and release the on/off button.
2.Disconnect the UPS from the AC power outlet.
3.To
This Uninterruptible Power Supply contains potentially hazardous voltages. DO NOT attempt to disassemble the unit. This UPS contains no user serviceable parts. Repairs and battery replacement must be performed by
AUTHORIZED SERVICE PERSONNEL ONLY.
CAUTION! To reduce the risk of electrical shock in conditions where |
load equipment grounding cannot be verified, disconnect the UPS from |
the AC power outlet before installing a computer interface cable. |
Reconnect the power cord only after all signaling connections are made. |
CAUTION! Connect the UPS to a two pole, three wire grounding |
AC power outlet. The receptacle must be connected to appropriate |
branch protection (circuit breaker or fuse). Connection to any other |
type of receptacle may result in a shock hazard and violate local |
electrical codes. |
3