Minuteman UPS Enterprise Plus Series user manual System Specifications

English

SYSTEM SPECIFICATIONS

Model Number E750RM2U

E1000RM2U

E1500RM2U

E1500RMT2U

E2000RM2U

E3000RM2U

E3000RMT2U

Topology		Line-Interactive, Sine Wave
Maximum Power Capacity	750VA	1000VA	1500VA	2000VA	3000VA
	600W	800W	1200W	1760W	2560W
		INPUT
Number of Phase		Single (1∅ 2W +G)
Nominal Voltage		120VAC (208VAC)
Acceptable Input voltage		0 - 165VAC (0 - 300VAC)
Voltage Range		80 - 164VAC (150 - 271VAC)
Frequency Limits		50 or 60 Hz, +/-6Hz, autosensing

Low Voltage Transfer Point 80V (150V) resets to Utility Power at 85V (157V) or higher

High Voltage Transfer Point 164V (271V) resets to Utility Power at 159V (264V) or lower

Input ProtectionResettable Circuit Breaker

	OUTPUT NON-BATTERY OPERATION
Voltage Range	120VAC: 105 - 134VAC (208VAC: 189 - 236VAC)
Voltage Regulation	120VAC: -12.5% - +11.7% (208VAC: -9.1% - +13.5%)
Frequency Range	60Hz: 54 - 66Hz or 50Hz: 44 - 56Hz
Efficiency (Line Mode)	>93% (Full Load)

	OUTPUT BATTERY OPERATION
Waveform Type	Sine Wave
Nominal Voltage	Default: 120VAC (208VAC), User selectable: 127VAC (240VAC)
Voltage Regulation	Nominal +/-5% (until Low Battery Warning)
Frequency	50/60Hz, +/-0.1Hz (unless synchronized to utility)
Voltage T.H.D.	<5% (Linear Load)
Dynamic Response	+/-10% @ 100% Load change in 30 ms
Transfer Time	2-6 ms Typical
Slew Rate	<1Hz / second
Overload Capacity	110% for 20-seconds
	125% for 10-seconds
	150% Shutdown Immediately
Protection	Over-Current, Short-Circuit Protected and Latching Shutdown

23