Minuteman UPS Enterprise Plus Series user manual Rear Panel

REAR PANEL

English

1.The RS232 Communications Interface Port is for UPS monitoring and control.

2.The USB Communications Interface Port is for UPS monitoring and control.

3.The RJ11 REPO (Remote Emergency Power Off) Port is for UPS control.

4.The option slot is for option cards.

5.The External Battery Connector is for connecting External Battery Packs.

6.The output circuit breaker will trip in the event the load exceeds the UPS’s power rating.

7.The Battery Backup output power receptacles. The output receptacles are electrically wired into two segments to support the "Load Shedding Function". The locking receptacle does not support the Load Shedding Function. NOTE: The locking recptacle is not on all models.

8.The input circuit breaker will trip in the event the load exceeds the UPS’s power rating.

9.The input power cord (120V models). The AC Power Inlet IEC320 (208V models).

10.The dipswitch is for setting the Inverter (On-Battery) output voltage.

11.The External Ground Stud is for connecting an external ground wire.

12.The R-J11/R-J45 modular connectors are used for 10/100 Base-T Network/single line Phone/Fax/Modem protection.

Model #	Input Power Plug	Output Power Receptacles
	(All power cords are 10ft)
E750RM2U	NEMA 5-15P	6-NEMA 5-15R
E1000RM2U	NEMA 5-15P	6-NEMA 5-15R
E1500RM2U	NEMA 5-15P	6-NEMA 5-15R
E2000RM2U	NEMA 5-20P	6-NEMA 5-15/20R
		1-NEMA L5-20R
E3000RM2U	NEMA L5-30P	6-NEMA 5-15/20R
		1-NEMA L5-30R
E1500RMT2U	NEMA 6-15P	6-NEMA 6-15R
E3000RMT2U	NEMA L6-30P	6-NEMA 6-15/20R
		1-NEMA L6-30R

8