GUIDE TO INSTALLATION AND OPERATION
Figure 4.4.5.1 MWI-CVBS rear connector panel
4.4.6 Y/C Analog Video Input Module (MWI-YC)
This module provides inputs for 4 channels of Y/C (S-video) analog video. The inputs are mini-DIN 4-pin connectors, internally terminated and available on the MWR-YC rear connection module (5). The MWR-YC accepts NTSC or PAL, PAL-M, PAL-N Y/C signals conforming to the SMPTE 170M or ITU-R BT.470-6 standard respectively.
Figure 4.4.6.1 MWI-YC rear connector panel
Connect Y/C video signals to the mini-DIN connectors (refer to figure 4.4.6.2 below for connector pinout).
Figure 4.4.6.2 Y/C connector pinout
4.4.7 Component Analog Video Input Module (MWI-CAV)
This module provides inputs for 4 channels of component analog video. The inputs are DE-15P connectors, internally terminated and available on the MWR-CAV (3) rear connection module. To facilitate cabling within existing installations, the MWA-BOC adapter breaking these DE-15P connectors out to 3 BNC connectors may be used if the signals arrive on separate coaxial cables (figure 4.4.7.3). Connector pinout is shown on figure 4.4.7.2. below.
Figure 4.4.7.1 MWI-CAV rear connector panel
Figure 4.4.7.2 CAV connector pinout