Miranda Camera Co KALEIDO-K2 Progressive Rgbhv Output 1 MWO-HR, Progressive Rgbhv Output 2 MWO-HR

Page 31

GUIDE TO INSTALLATION AND OPERATION

OUTPUT

PROGRESSIVE RGBHV OUTPUT 1 (MWO-HR)

SIGNAL:

Analog RGBHV

RESOLUTION:

From 800 x 600 to 1600 X 1200 NI

H FREQUENCY:

31 kHz to 96 kHz

REFRESH RATE:

50/59.94 Hz

CABLE LENGH:

5m (low), 20m (medium) and 50m (high) cables built-in equalizer (Belden 1694)

LEVEL:

Selectable 0.7 or 1.0 Vp-p

CONNECTOR:

DE-15S (female)

PROGRESSIVE RGBHV OUTPUT 2 (MWO-HR)

SIGNAL:

Analog RGBHV

RESOLUTION:

From 800 x 600 to 1600 X 1200 NI

H FREQUENCY:

31 kHz to 96 kHz

REFRESH RATE:

50/59.94 Hz

LEVEL:

Selectable 0.7 or 1.0 Vp-p

CABLE LENGH:

4.5 m (15’)

CONNECTOR:

DVI-I Mixed with adaptor to DE-15S (female)

DVI OUTPUT

 

SIGNAL:

DVI

RESOLUTION:

From 800 x 600 to 1600 X 1200 NI

H FREQUENCY:

37 kHz to 96 kHz

REFRESH RATE:

50/59.94 Hz

CABLE LENGH:

3.6 m (12’) with Altinex CB4012DV

CONNECTOR:

DVI-I

AUDIO MONITORING OUTPUT (MWO-HR)

SIGNAL (Analog):

Balanced analog stereo

IMPEDANCE:

< 600 Ω

LEVEL:

+24 dBu maximum

VOLUME CONTROL:

6 dBu steps

SIGNAL (Digital)

AES3

IMPEDANCE:

110 Ω

CONNECTOR:

Header 8

CONTROL

GPI INPUT (MWA-GPI)

 

DESCRIPTION:

Contact closure

SIGNAL (66):

5 to 24 VDC

CONNECTOR(2):

DC-37S (female)

GPI OUTPUT (MWA-GPI)

 

DESCRIPTION:

Photo isolated Contact closure

SIGNAL(36):

Open collector 5 to 40 VDC

CONNECTOR(2):

DC-37S (female)

RS-422/485

 

SIGNAL:

RS-422 (SMPTE 207M, EBU-3245), RS-485

CONNECTOR:

DE-9S (female)

RS-232 (MWA-CPU)

 

SIGNAL:

RS-232 (EIA/TIA-232)

CONNECTOR:

DE-9P (male)

 

Kaleido K2 27

Image 31
Contents Kaleido-K2 How to contact us Safety Compliance InformationElectromagnetic Compatibility Contents Guide to Installation and Operation Introduction Features1 Kaleido-K2 functional block diagram Front Panel OverviewRear Panel Unpacking Mechanical InstallationRack-mount installation Installing Kaleido-RCP in a rack using the mounting bracket2 Moving the connector Frame Frame and Electrical InstallationPower supplies InstallationOperation Module installation and replacementVentilation Module card installation Connector panel installationPosition Module type Color Code Controller Module Module description and connectionOption USBMouse Keyboard LTC1.4 Front edge of Controller module GPI Module 2.1 GPI rear connector panel2.4 Installing lexan on the MWA-TBA-G terminal block adapter Analog Audio Input Module MWI-SA 3.1 MWI-SA rear connector panelComposite Analog Video Input Module MWI-CVBS Digital Audio Input Module MWI-AESComponent Analog Video Input Module MWI-CAV 6 Y/C Analog Video Input Module MWI-YCAnalog Progressive Rgbvh Input Module MWI-VGA Digital Video SD-SDI Input Module MWI-SDIOutput Module MWO-HR HD-SDI Video Input Module MWI-HDControlling multiple Kaleido-K2s through an ethernet network Multiple Kaleido-K2 installation1 Cascading two Kaleido-K2s 3 RS-422 Serial ID Assignment RS-422 Multi-drop Cable ExampleOperation Installation of SoftwareStartup and preparation to use software Replacing a defective fan MaintenanceCleaning the air filter Replacing a defective power supply1 Replacing the fan Specifications Time Code Input Progressive Rgbhv Input MWI-VGAAnalog Audio Input MWI-SA Digital Audio Input MWI-AESAudio Monitoring Output MWO-HR Progressive Rgbhv Output 1 MWO-HRProgressive Rgbhv Output 2 MWO-HR DVI OutputUSB PORTMWA-CPU Remote Control PanelRemote Port MWA-CPU Ethernet PORTMWA-CPU