Miranda Camera Co KALEIDO-K2, M406-9900-402 specifications Moving the connector

GUIDE TO INSTALLATION AND OPERATION

Figure 3.2.2 Moving the connector

Once the DE-9 connector is installed in the proper opening and the unit reassembled, do the following:

-Remove the 4 rubber feet on the underside of the unit.

-Place the Kaleido-RCP into the mounting bracket and secure it using the supplied screws (figure 3.2.3).

-Install the unit into the rack using the appropriate rack screws and washers (not provided).

Figure 3.2.3 Installing Kaleido-RCP into mounting kit

Kaleido K2 5