For Mac, For PC, Using AC/DC Adapter optional

Introducing IEEE1394A FireWire/Hi-Speed USB2.0 2.5" Hard Drive Data Encrypt Enclosure-PHR-250CE

Thank you for using the PHR-250CE-Portable IEEE1394A FireWire/Hi- Speed USB2.0 2.5" Hard Drive Enclosure. This is a portable size enclosure which support 2.5” IDE Hard drive. It is simple to install and comes with all the parts you need to create an external IEEE1394A FireWire/ Hi-Speed USB2.0 device.

About This Guide

Before you begin using the PHR-250CE, be sure to read this manual in its entirety.

This guide contains:

•Introducing IEEE1394 FireWire/Hi-Speed USB2.0 2.5" Hard Drive Data Encrypt Enclosure

•Hardware Installation

•Software Installation

System Requirements

For Mac

•G3, G4, iMac, G3 PowerBook, iBook or G4 PowerBook models with USB or FireWire port ready

•MacOS 9.2, FireWire support 2.4 and up, and/or USB support 1.4.1 and up for USB1.1 Speed

•MacOS X for USB2.0 Hi-Speed (USB2.0 Host adapter required)

For PC

•Pentium II or compatible Desktop or Notebook with USB or IEEE 1394 FireWire port ready.

•Windows98 SE, Windows2000, WindowsME or WindowsXP

•USB2.0 host adapter is required for Hi-Speed USB2.0 transfer speed

Using AC/DC Adapter (optional)

Basically, if you connect the PHR-250CC direct into built-in FireWire or USB port (USB power cable is also needed), AC/DC adapter is not required. However

(1)if USB connection dose not response or

(2)the PHR-250CC Enclosure is connected to a CardBus to FireWire adapter, or 4-pin iLink Firewire port

AC/DC adapter is required.