4. Press MENU/EXIT twice* on the projector or remote control to leave and save the settings.
*The first press leads you back to the main menu and the second press closes the OSD menu.
Language and press / to select a preferred language.
Using the menus
The projector is equipped with
Below is the overview of the OSD menu.
Main menu icon
Main menu
Highlight
Current input signal
Status
Press MENU/ EXIT to the previous page or to exit.
The following example describes how to set the OSD language.
1. Press MENU/EXIT on the projector or 3. Press 
to highlight remote control to turn the OSD menu
on.
2. Use 
/ 
to highlight the SYSTEM SETUP: Basic menu.
34 Operation
