BenQ MW860USTi Personalizing the projector menu display, Adjusting the microphone’s sound level

2.Highlight Power on/off Ring Tone and select Off.

The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power on/off ring tone.

Adjusting the microphone’s sound level

To adjust the sound level, press MIC/VOL +/- on the remote control, or

1. Repeat steps 1-2 in Muting the sound section.

2. Highlight Microphone volumee and select a desired sound level.

Microphone sound will still function even though Mute is activated.

Personalizing the projector menu display

The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the projection settings, operation, or performance.

•Menu display time in the SYSTEM SETUP: Basic > Menu Settings menu sets the length of time the OSD will remain active after your last key press. The time length

ranges from 5 to 30 seconds in 5-second increments. Use / to select a suitable time frame.

•Menu position in the SYSTEM SETUP: Basic > Menu Settings menu sets the OSD position in five locations. Use / to select a preferred position.

•Language in the SYSTEM SETUP: Basic menu sets your familiar language for the OSD menus. Use / to select your language.

•Reminder Message in the SYSTEM SETUP: Basic > Menu Settings menu sets

whether to display reminder messages on screen. Use / to select your desired setting.

•Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen to be displayed during projector start-up. Use / to select a screen.

Operation 49