Connecting a monitor
If you want to view your presentation
To connect the projector to a monitor:
1.Connect the projector to a computer as described in "Connecting a computer" on page 23.
2.Take a suitable VGA cable (only one supplied) and connect one end of the cable to the
Or if your monitor is equipped with a DVI input jack, take a VGA to
3.Connect the other end of the cable to the MONITOR OUT jack on the projector.
•The output signal for MONITOR OUT jack only works when the input signal comes from COMPUTER 1 or COMPUTER 2 jack. When the projector is powered on, the output signal from MONITOR OUT jack varies depending on the input signal from COMPUTER 1 or COMPUTER 2 jack.
•If you wish to use this connection method when the projector is in standby mode, make sure the Standby Monitor Out function is turned on in the SYSTEM SETUP: Advanced menu. See "Standby Settings" on page 88 for details.
Connection 25