Photogenic Professional Lighting PM400R, PM800R manual Flash Power Bracketing

Page 10

Flash Power Bracketing:

Bracketing refers to taking up to three (3) exposures in a sequence with different flash intensities, either additional watt seconds or fewer watt seconds, from the displayed or selected “primary” base intensity. The PhotoMaster enables you to set the base flash power and then one high and one low bracketing value. Once the setting(s) have been pre-set, a sequence of power levels will automatically occur as you take the exposures. If you wish to only bracket up from the primary, set a HIGH value and leave the LOW value at “0”. If you wish to only bracket down from the primary, set the HIGH value at “0” and set a LOW value.

The 3-exposure bracketing sequence is:

1.Primary power setting.

2.Higher power pre-set.

3.Lower pre-set.

The 2-exposure bracketing sequence is:

1.Primary power setting.

2.Either Higher or Lower (skips the “0” settings)

To set or change the Auto-Bracketing settings:

1.Press the Auto-Bracketingbutton 3 times. This will cause the display to read “br”, then H. .0

2.Press the small up or down (1/10) button to set the HIGH value. The values can be set at zero “0” to “1.5” f-stops above the primary power setting.

3.Press the large up (1/2) button once. This will cause the display to read “L. .0

4.Press the small down or up (1/10) button to set the LOW value. The values can be set at zero “0” to “1.5” f-stops below the primary power setting.

5.Press the AUTO-BRACKETbutton to save these pre-sets.

To turn off the Auto-Bracketing settings:

Setting both the HIGH and the LOW values at zero “0” will turn off the Auto-Bracket feature.

Note: The auto-bracketing settings are retained and sequenced until the feature is manually turned off. If the primary power setting is changed the Auto-Bracketing feature will continue to sequence using the pre-set HIGH and LOW values from the new primary level.

(This bracketing feature is limited by the 6 f-stop range of total watt seconds available.)

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents PhotoMaster ForPA8C, PA8D & PA8F Safety Precautions Unpacking and SetupPage Head Connector TOP View Power-Up display sequence Power InputCircuit Protection Functional Operation Power SwitchFlash Power Ready LightModeling Lights Ratio Light Head Flash PowerDiagnostic Display Codes Test FunctionSynchronization and Triggering Photocell/Photo SlaveFlash Power Bracketing Operational Parameters Specifications GeneralFlashing Rate Power Level OperatingOperational Parameters TimeVoltage Smart PhotoMaster PM800, PM800R Automatic Discharge Advanced Powerlight FeaturesUnit Number Assignment Voltage Smart PhotoMaster PM400R & PM800R PLIRC-1 Infrared remote controllerPLIRC-1 Use General Trouble Shooting Common Problems and CausesLimited PhotoMaster Warranty ServicePA8 Quick Change Accessories ReflectorsPhotogenic Professional Lighting

PM400, PM800, PM400R, PM800R specifications

The Photogenic Professional Lighting series, including models PM400R, PM800, PM400, and PM800R, is designed for photographers seeking high-quality lighting solutions that enhance their creative vision. These robust lighting systems are perfect for studio setups or on-location shoots, offering versatility and convenience.

The PM400R and PM800 are known for their powerful performance capabilities. The PM800 boasts a maximum output of 800 watts, providing ample light for various photography genres, from portraits to large group shots. In contrast, the PM400R offers 400 watts of power, making it suitable for smaller setups while still delivering stunning results. The ability to adjust power settings allows photographers to fine-tune their lighting to achieve the desired effect, whether soft and natural or dramatic and stark.

A key feature of the PM series is the built-in modeling light, which enables photographers to visualize how the light will interact with their subject before capturing the shot. This feature is complemented by precise adjustment controls, allowing for easy manipulation of light intensity and quality.

All models in this series utilize advanced flash technology, ensuring consistent color temperature and flash duration. This is crucial for maintaining color accuracy throughout the shoot, minimizing the need for extensive post-processing. The fast recycling time further enhances workflow efficiency, allowing photographers to capture multiple frames quickly without sacrificing quality.

The design of the PM400R and PM800 includes a robust build, ensuring durability and longevity, even under heavy use. The lightweight design allows for easy transportation, making these lights perfect for photographers who frequently change locations. Additionally, the series is compatible with a variety of light modifiers, enabling users to customize their lighting setup to suit different styles and preferences.

Furthermore, the LED ready feature in the PM400 and PM800R ensures they can easily adapt to various lighting needs, allowing photographers the option to work with continuous lighting when necessary. This flexibility makes the series not only practical but also future-proof, adapting to the evolving demands of photography.

In summary, the Photogenic PM400R, PM800, PM400, and PM800R stand out for their professional-grade performance, versatile features, and user-friendly design. With these lights, photographers can elevate their craft, achieving stunning results that truly capture their artistic vision.
Top Page Image Contents