Photogenic Professional Lighting PM800R Modeling Lights, Test Function, Diagnostic Display Codes

Page 8

Modeling Lights:

The modeling lights have three symmetrical modes of operation (NOT independent):

1.MANUAL adjusts the modeling lamp intensity using the 1/2 or 1/10 f-stops UP/DOWN arrow buttons. Press the manual ADJUST button (F) to turn the MODEL yellow LED (B) on. Pressing the manual ADJUST button (F) a second time will change the mode to flash adjustment and is indicated by the illuminated red Flash LED (A).

2.TRACK mode (Proportional modeling) causes the modeling lamp intensity to track the FLASH setting. The modeling lamp may be re-set to full intensity at any FLASH value, by simply pressing the TRACK/SET button (G) a second time, with the FLASH already set to desired watt-seconds. This setting is retained when the user returns from another mode.

3.FULL ON/OFF is exactly what it says. Press the FULL ON/OFF button (C) to turn the modeling lamp OFF (LED off) or ON (LED on).

Note: All current mode settings are retained, even after the power is turned off.

4.Each light head modeling lamp can also be turned on/off with rear switch on the respective light head.

Test Function:

The TEST Flash button is pressed to fire the flashtube for test purposes, to re-set after a misfire or to dump stored power when moving to a lower watt second level.

Ratio Light Head Flash Power:

The two left light heads (looking at the power supply front) can have a 3:1 flash power ratio to the two right light heads. There are four flash capacitors, of equal value, inside the power supply. All four light heads share the total flash power setting. The RATIO function simply connects the two left light heads to three flash capacitors and the two right light heads to one flash capacitor. [Note that if all four light heads are used, without ratio, each would deliver 1/4 of the flash power setting. If all four light heads are used, with ratio, the two left light heads would each deliver 3/8 of the flash setting, and the two right light heads would each deliver 1/8 of the flash setting (3:1 ratio). If using three heads (two left and one right), the two left heads would each deliver 3/8 of setting and the right head would deliver 1/4 of the setting. ] The RATIO feature can be turned ON (LED on) or OFF (LED off) with the RATIO/Auto Bracket button.

Diagnostic Display Codes:

In addition to internal thermal protection, the microcomputer software monitors the AC line power and flash power consumption to prevent catastrophic damage to your new PhotoMaster units. The following error codes may be displayed:

“Er-0” message means that an AC line power frequency problem has occurred. This could be internal or in the power cable or outlet at the location. Try turning the main power off, wait for 5 seconds and turn power back on.

“Er-1” message means that an AC line power voltage problem has occurred. This could be internal or can happen with voltage spikes and voltage fall-off in the location AC line power. Try turning the main power off, wait for 5 seconds and turn power back on.

8

Image 8
Contents PhotoMaster ForPA8C, PA8D & PA8F Safety Precautions Unpacking and SetupPage Head Connector TOP View Circuit Protection Power InputPower-Up display sequence Power Switch Flash PowerFunctional Operation Ready LightRatio Light Head Flash Power Diagnostic Display CodesModeling Lights Test FunctionSynchronization and Triggering Photocell/Photo SlaveFlash Power Bracketing Operational Parameters Specifications GeneralPower Level Operating Operational ParametersFlashing Rate TimeVoltage Smart PhotoMaster PM800, PM800R Unit Number Assignment Advanced Powerlight FeaturesAutomatic Discharge PLIRC-1 Use PLIRC-1 Infrared remote controllerVoltage Smart PhotoMaster PM400R & PM800R General Trouble Shooting Common Problems and CausesLimited PhotoMaster Warranty ServicePA8 Quick Change Accessories ReflectorsPhotogenic Professional Lighting

PM400, PM800, PM400R, PM800R specifications

The Photogenic Professional Lighting series, including models PM400R, PM800, PM400, and PM800R, is designed for photographers seeking high-quality lighting solutions that enhance their creative vision. These robust lighting systems are perfect for studio setups or on-location shoots, offering versatility and convenience.

The PM400R and PM800 are known for their powerful performance capabilities. The PM800 boasts a maximum output of 800 watts, providing ample light for various photography genres, from portraits to large group shots. In contrast, the PM400R offers 400 watts of power, making it suitable for smaller setups while still delivering stunning results. The ability to adjust power settings allows photographers to fine-tune their lighting to achieve the desired effect, whether soft and natural or dramatic and stark.

A key feature of the PM series is the built-in modeling light, which enables photographers to visualize how the light will interact with their subject before capturing the shot. This feature is complemented by precise adjustment controls, allowing for easy manipulation of light intensity and quality.

All models in this series utilize advanced flash technology, ensuring consistent color temperature and flash duration. This is crucial for maintaining color accuracy throughout the shoot, minimizing the need for extensive post-processing. The fast recycling time further enhances workflow efficiency, allowing photographers to capture multiple frames quickly without sacrificing quality.

The design of the PM400R and PM800 includes a robust build, ensuring durability and longevity, even under heavy use. The lightweight design allows for easy transportation, making these lights perfect for photographers who frequently change locations. Additionally, the series is compatible with a variety of light modifiers, enabling users to customize their lighting setup to suit different styles and preferences.

Furthermore, the LED ready feature in the PM400 and PM800R ensures they can easily adapt to various lighting needs, allowing photographers the option to work with continuous lighting when necessary. This flexibility makes the series not only practical but also future-proof, adapting to the evolving demands of photography.

In summary, the Photogenic PM400R, PM800, PM400, and PM800R stand out for their professional-grade performance, versatile features, and user-friendly design. With these lights, photographers can elevate their craft, achieving stunning results that truly capture their artistic vision.