Photogenic Professional Lighting PM400, PM800R Advanced Powerlight Features, Automatic Discharge

Page 15

ADVANCED POWERLIGHT FEATURES.

Voltage Smart PhotoMaster PM400, PM400R, PM800 & PM800R

Automatic Discharge

Each time the AC line power is disconnected or switched off, the unit will automatically flash-dump most of the stored power, and then discharge by resistor the remainder of the stored power. This removes all of the flash capacitor charge to prolong the life of the unit and is a much safer condition for storage, for transporting, and replacement of flash tube or modeling lamp. Even if the flash tube is defective or absent, the internal resistor will discharge all power within 30 seconds after the unit is turned off. This is a feature, over which the user has no control.

Unit Number Assignment

This feature allows the user to assign a UNIT NUMBER (1 to 9) to each PhotoMaster in the studio. The UNIT NUMBER is necessary when INFRARED remote control is used with the PM400R or PM800R models (see accessories.)

To assign a UNIT NUMBER, the startup sequence will need to be interrupted. Turn PhotoMaster AC power OFF. With the unit OFF press and hold the ½ stop “UP” button then turn the power switch to ON, continue holding the ½ stop button until the display reads “ir” then release the button. The Digital display should read “ir” when you press and release the ½ UP button again, and the display will then read “Un - 1”, or some number 1 to 9. To change the UNIT number, press and release the 1/10 UP/DOWN arrow buttons until the desired number is displayed. To save and close the assignment feature and save the UNIT number, press and release the 1/2 UP arrow button again. This allows the startup sequence to finish and save the new settings. Each “R” unit’s default unit number is set at “Un - 1”. You must re- set the unit number with the 1/10 adjustment buttons, or the default “Un 1” will automatically be assigned.

Wireless Setup.

The “R” units are pre-set for Infrared wireless operations at the factory and no adjustments are necessary for operation. See next section.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents For PhotoMasterPA8C, PA8D & PA8F Unpacking and Setup Safety PrecautionsPage Head Connector TOP View Power Input Power-Up display sequenceCircuit Protection Ready Light Power SwitchFlash Power Functional OperationTest Function Ratio Light Head Flash PowerDiagnostic Display Codes Modeling LightsPhotocell/Photo Slave Synchronization and TriggeringFlash Power Bracketing Operational Parameters General SpecificationsTime Power Level OperatingOperational Parameters Flashing RateVoltage Smart PhotoMaster PM800, PM800R Advanced Powerlight Features Automatic DischargeUnit Number Assignment PLIRC-1 Infrared remote controller Voltage Smart PhotoMaster PM400R & PM800RPLIRC-1 Use Common Problems and Causes General Trouble ShootingService Limited PhotoMaster WarrantyReflectors PA8 Quick Change AccessoriesPhotogenic Professional Lighting

PM400, PM800, PM400R, PM800R specifications

The Photogenic Professional Lighting series, including models PM400R, PM800, PM400, and PM800R, is designed for photographers seeking high-quality lighting solutions that enhance their creative vision. These robust lighting systems are perfect for studio setups or on-location shoots, offering versatility and convenience.

The PM400R and PM800 are known for their powerful performance capabilities. The PM800 boasts a maximum output of 800 watts, providing ample light for various photography genres, from portraits to large group shots. In contrast, the PM400R offers 400 watts of power, making it suitable for smaller setups while still delivering stunning results. The ability to adjust power settings allows photographers to fine-tune their lighting to achieve the desired effect, whether soft and natural or dramatic and stark.

A key feature of the PM series is the built-in modeling light, which enables photographers to visualize how the light will interact with their subject before capturing the shot. This feature is complemented by precise adjustment controls, allowing for easy manipulation of light intensity and quality.

All models in this series utilize advanced flash technology, ensuring consistent color temperature and flash duration. This is crucial for maintaining color accuracy throughout the shoot, minimizing the need for extensive post-processing. The fast recycling time further enhances workflow efficiency, allowing photographers to capture multiple frames quickly without sacrificing quality.

The design of the PM400R and PM800 includes a robust build, ensuring durability and longevity, even under heavy use. The lightweight design allows for easy transportation, making these lights perfect for photographers who frequently change locations. Additionally, the series is compatible with a variety of light modifiers, enabling users to customize their lighting setup to suit different styles and preferences.

Furthermore, the LED ready feature in the PM400 and PM800R ensures they can easily adapt to various lighting needs, allowing photographers the option to work with continuous lighting when necessary. This flexibility makes the series not only practical but also future-proof, adapting to the evolving demands of photography.

In summary, the Photogenic PM400R, PM800, PM400, and PM800R stand out for their professional-grade performance, versatile features, and user-friendly design. With these lights, photographers can elevate their craft, achieving stunning results that truly capture their artistic vision.
Top Page Image Contents