Photogenic Professional Lighting PM800R, PM400R manual Operational Parameters

Page 11

OPERATIONAL PARAMETERS

Voltage Smart PhotoMaster PM400R & PM400R

Flashing Rate:

The unit recharges quickly, as indicated by the READY light on the control panel. A quick series of flashes can be obtained within the limits of the recharge time. Continuous rapid flashing, however, can overheat and damage the flashtube and internal parts. The maximum recommended rate of flashing would depend upon the power level being used and the amount of operation time. Use the following chart to serve as a guide for the maximum rate to use in your situation.

Power Level

Operating

Sec. Between

Number of

 

Time

Flashes.

Flashes

Full

Continuous

8.3

Continuous

 

6.8 Minutes

4

100

 

2 Minutes

4

60

1/2

Continuous

3.3

Continuous

 

6.8 Minutes

2

200

 

2 Minutes

1

116

1/4

Continuous

2

Continuous

Exposure Information:

The following charts give the BCPS output for various umbrellas and reflectors. Coverage angle is given in degrees.

Umbrella

32 inch

45 inch

60 inch

Coverage

120 degree

120 degree

120 degree

 

 

 

 

Full Power

4400

4466

4466

½

2200

2233

2233

¼

1100

1117

1117

1/8

550

558

558

1/16

275

279

279

1/32

137

140

140

Reflector

 

 

 

Diameter

None

7 ½”

14”

Coverage

360°

35°

40°

 

 

 

 

Full Power

1866

20000

14000

½

933

10000

7000

¼

467

5000

3500

1/8

233

2500

1750

1/16

117

1250

875

1/32

58

625

438

GN@ASA100/10’

88

292

244

16” 60°

18666

9333

4667

2333

1167

583

280

20”

24”

65°

145°

 

 

13066

3360

6533

1680

3267

840

1633

420

817210

408105

236120

11

Image 11
Contents For PhotoMasterPA8C, PA8D & PA8F Unpacking and Setup Safety PrecautionsPage Head Connector TOP View Circuit Protection Power InputPower-Up display sequence Ready Light Power SwitchFlash Power Functional OperationTest Function Ratio Light Head Flash PowerDiagnostic Display Codes Modeling LightsPhotocell/Photo Slave Synchronization and TriggeringFlash Power Bracketing Operational Parameters General SpecificationsTime Power Level OperatingOperational Parameters Flashing RateVoltage Smart PhotoMaster PM800, PM800R Unit Number Assignment Advanced Powerlight FeaturesAutomatic Discharge PLIRC-1 Use PLIRC-1 Infrared remote controllerVoltage Smart PhotoMaster PM400R & PM800R Common Problems and Causes General Trouble ShootingService Limited PhotoMaster WarrantyReflectors PA8 Quick Change AccessoriesPhotogenic Professional Lighting

PM400, PM800, PM400R, PM800R specifications

The Photogenic Professional Lighting series, including models PM400R, PM800, PM400, and PM800R, is designed for photographers seeking high-quality lighting solutions that enhance their creative vision. These robust lighting systems are perfect for studio setups or on-location shoots, offering versatility and convenience.

The PM400R and PM800 are known for their powerful performance capabilities. The PM800 boasts a maximum output of 800 watts, providing ample light for various photography genres, from portraits to large group shots. In contrast, the PM400R offers 400 watts of power, making it suitable for smaller setups while still delivering stunning results. The ability to adjust power settings allows photographers to fine-tune their lighting to achieve the desired effect, whether soft and natural or dramatic and stark.

A key feature of the PM series is the built-in modeling light, which enables photographers to visualize how the light will interact with their subject before capturing the shot. This feature is complemented by precise adjustment controls, allowing for easy manipulation of light intensity and quality.

All models in this series utilize advanced flash technology, ensuring consistent color temperature and flash duration. This is crucial for maintaining color accuracy throughout the shoot, minimizing the need for extensive post-processing. The fast recycling time further enhances workflow efficiency, allowing photographers to capture multiple frames quickly without sacrificing quality.

The design of the PM400R and PM800 includes a robust build, ensuring durability and longevity, even under heavy use. The lightweight design allows for easy transportation, making these lights perfect for photographers who frequently change locations. Additionally, the series is compatible with a variety of light modifiers, enabling users to customize their lighting setup to suit different styles and preferences.

Furthermore, the LED ready feature in the PM400 and PM800R ensures they can easily adapt to various lighting needs, allowing photographers the option to work with continuous lighting when necessary. This flexibility makes the series not only practical but also future-proof, adapting to the evolving demands of photography.

In summary, the Photogenic PM400R, PM800, PM400, and PM800R stand out for their professional-grade performance, versatile features, and user-friendly design. With these lights, photographers can elevate their craft, achieving stunning results that truly capture their artistic vision.