Perlick DC72S, DC96S, DC84S Pouring a Perfect Glass of Beer Concessionaire Dispensers, Step

Page 8

Pouring a Perfect Glass of Beer – Concessionaire Dispensers

Start with a clean glass. Place the glass at a 45° angle, one inch below faucet. Do not let the glass touch the faucet. Open the faucet all the way.

Step 2

After the glass has reached half full, gradually bring the glass to the upright position

Step 3

Let the remaining beer run straight down the middle of the glass.

This ensures proper release of CO2 by producing a 3⁄4” to 1” foam head.

Step 4

			Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.


Form No. Z2283			8
Rev. 06.14.10			8

Image 8

Contents Model NOS End View TopView Installation and Operating InstructionsModel Nos DC72S DC84S DC96S Preparing the Cabinet for Use Concessionaire Dispensers Installation and Tapping Concessionaire Dispensers Connecting the Keg CouplerImportant Be sure to close this valve when untapping keg Tapping a Single Valve Keg SankeyConnecting the Regulator to the CO2 Cylinder Adjusting the CO2 Gas FlowReplacing CO2 Gas Cylinder Proper CO2 HandlingTemperature Refrigeration and Temperature ControlAdjusting the Temperature Draft Beer Information Concessionaire DispensersCleaning the Beer System Concessionaire Dispensers Cleaning the CabinetCleaning the Condenser BacteriaPouring a Perfect Glass of Beer Concessionaire Dispensers StepTrouble Shooting Concessionaire Dispensers Beer Service Problems Wild BeerFlat Beer Cloudy BeerDC72S DC84S DC96S Condensing Units Replacement Parts Concessionaire DispensersEvaproator Assembly Wiring Diagram Concessionaire Dispensers For Single Valve Keg Coupler Series DMicellaneous Part DescriptionReversing Door Hinge Tools Required