Powercom 800VA user manual Presentation

Page 6

3. Presentation

FRONT PANEL

3.1 "REPLACE BATTERY" indicator (RED LED)

The LED illuminates when the UPS's battery is no longer useful and must be replaced.

3.2 "BUCK AVR (VOLTAGE REDUCTION)" indicator (YELLOW LED)

The LED illuminates when the UPS is correcting a high utility voltage condition. The loads receive normal power.

3.3 "BACK UP" indicator (YELLOW LED)

The LED illuminates when the UPS is supplying battery power to the loads.

3.4 "BOOST AVR (VOLTAGE BOOST)" indicator (YELLOW LED)

The LED illuminates when the UPS is correcting a low utility voltage condition. The loads receive normal power.

3.5"LINE NORMAL" indicator (GREEN LED)

3.6"ON/OFF/TEST/SILENCE" button

Press the button more than 2 seconds to turn the UPS on or off, press the button less than 1 second to activate the UPS's self-testing or silence the back up alarm.

3.1

3.2

3.3

3.4

3.5

3.6

800VA/1000VA/1200VA/1500VA/2200VA

3

Image 6
Contents USER‘S Manual Important safety instructions Please read this manualTable of contents Introduction Safety Presentation External Battery Pack Connector optional Rear PanelInstallation Connect to Utility Charge the batteryCheck the Site Wiring Fault Indicator Connect the loadsOperation LOW Battery rapid alarm AlarmBack UP slow alarm Overload continuous alarmPower Monitoring Software Software optionsInterface Kits SUB 9 Pin Female Connector for white cable SUB 9 Pin Female Connector for purpure cableComputer Interface Port Battery Replacement Storage conditions TroubleshootingStorage Extended storageSpecifications Page