Pressure Systems 9046 Command ’c’ Sub-command Index 04 Return Stream Information, Character

Page 61

Pressure Systems, Inc.

Model 9046 User’s Manual

 

 

5.7.5 Command ’c’ - Sub-command Index 04: Return Stream Information

This sub-command returns current stream configuration information in its response. Its format is:

Command

“c 04 st”

 

‘c’ is the operation code

 

‘04’ is the sub-command index (‘ii’) for configuration

 

‘st’ is the stream identifier character (1, 2, or 3 only)

 

NOTE: all parameters are separated by a space

 

character.

Response

“st pppp sync per f num pro remport ipaddr bbbb ”

 

‘st’ is the stream identifier digit (1,2, or 3)

 

‘pppp’ is a hex position field (channel selection bit

 

map)

 

‘sync’ is sync type character (0 or 1)

 

‘per’ is the period (# trigger periods or delay timer

 

period)

 

‘f’ is the format of the data delivered in stream

 

‘num’ is the number of scans delivered in the

 

stream

 

‘pro’ identifies the protocol used for stream delivery

 

(1=UDP/IP, 0=TCP/IP. This protocol identifier

 

pertains to stream delivery only.

 

‘remport’ identifies the remote port number to which

 

each stream delivery is directed in the host. A value

 

of -1 indicates that stream delivery is directed to the

 

same port number the host is using to send

 

commands to the module.

 

‘ipaddr’ identifies the IP address of the host to which

 

the stream delivery is directed.

 

‘bbbb’ another position field (data group options bit

 

map) as specified by the “05” sub-command.

 

NOTE: All datum fields separated by a space

 

character.

 

 

Autonomous

none generated

Packet

 

 

 

Page 55

www.PressureSystems.com

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Model Ethernet Intelligent Temperature Scanner User’s Manual Page Table of Contents Merchandise Return Procedures Our WarrantyOur Company Technical SupportWebsite and E-Mail Our Firmware Our Publication Disclaimer This page left intentionally blank General IntroductionIntroduction Exploded View of Module Physical DescriptionThermocouple Cold Junction Compensation Theory of OperationOpen Circuit Detection Setup InstructionsEquipment Required Network Dialog Box Computer PreparationTCP/IP Properties Dialog Box Cable Connections Module ConnectionPressure Systems, Inc Model 9046 User’s Manual Network Status Screen IP Address AssignmentNetwork Status after connection ConfigureNetwork Options Pulldown Menu Pressure Systems, Inc Model 9046 User’s Manual Set Sensor Type Sensor Type Values Read Sensor Type Thermocouple Reference Temperature AlarmsC05 Read Temperature Units Set Temperature UnitsWrite EU Filter Parameter V0110b ddV00152 U00152 Read EU Filter ParameterCalibration V00100 H0001U00100 W08Pressure Systems, Inc Model 9046 User’s Manual Firmware Sensor Type Gain Setting Engineering Va, Vb UnitsDescription of Operation Thermocouple VoltageResistance ThermistorUpdating the Firmware This page intentionally blank Command Quick Reference Command SetPressure Systems, Inc.Model 9046 User’s Manual Summary Information About All Commands Pressure Systems, Inc Model 9046 User’s Manual Pressure Systems, Inc Model 9046 User’s Manual No Operation Command ’A’ Reset Command ’B’ Purpose Read Primary Transducer Volts Command ’V’Vppppf Dddd.. dddd999999 -4.989500 0.005390 V11110Read Primary Transducer A/D Counts Command ’a’ 32767.000000 -32700.000000 10.000000 A11110Aaaabbbbcccc..pppp Read Primary Transducer E. U. Data at High Speed Command ’b’Nuss does not use this command normally. You may execute it Define/Control Autonomous Host Streams Command ’c’ Pressure Systems, Inc Model 9046 User’s Manual Pressure Systems, Inc Model 9046 User’s Manual Pressure Systems, Inc Model 9046 User’s Manual Pressure Systems, Inc Model 9046 User’s Manual Read response 00 1 000F 0 1 7 0 c 00 2 00F0 0 2 7 0 c 00 3 FF00 0 4 7 Pressure Systems, Inc Model 9046 User’s Manual Command ’c’- Sub-command Index 01 Start Streams Example Space Command ’c’- Sub-command Index 02 Stop StreamsExample 02 0 c 03 3 c 01 Command ’c’- Sub-command Index 03 Clear StreamsPressure Systems, Inc Model 9046 User’s Manual Character Command ’c’ Sub-command Index 04 Return Stream InformationFfff 0 20 7 32000 1 7002 200.200.200.1 DescriptionPrefix/Data Groups Enable UTR Temperature/Other EU Data ûC Enable Primary Transducer Temperature/ResistanceEnable UTR Temperature/Other A/D Counts Enable UTR Temperature/Other Voltages05 1 Command c 06 st pro remport ipaddr 06 0 06 0 1Nuss does not normally use this command since it generates This page intentionally left blank Model 9046 Ethernet Interface Cable Appendix a Cable DiagramsModel 9046 Ethernet Interface Cable Headquarters/Factory European Office

9046 specifications

Pressure Systems 9046 is a highly advanced pressure management solution designed to cater to various industrial and commercial applications. Renowned for its robust performance and reliability, this system is engineered to optimize pressure levels in a wide range of environments, ensuring efficiency and safety in operations.

At its core, Pressure Systems 9046 integrates cutting-edge technologies that enhance its functionality and user experience. One of its main features is the Smart Pressure Regulation Technology (SPRT), which utilizes intelligent algorithms to automatically adjust and maintain optimal pressure levels. This ensures that processes run smoothly, minimizing the risk of pressure fluctuations that can lead to equipment damage or operational downtime.

Another standout characteristic of the Pressure Systems 9046 is its modular design. This allows for easy scalability and customization, enabling users to configure the system according to their specific needs. Whether addressing low-pressure applications or high-pressure requirements, the modular setup can adapt and expand, providing flexibility for various industrial settings.

In addition, the system is equipped with advanced monitoring capabilities. With real-time data tracking and reporting, operators can monitor pressure levels, detect anomalies, and analyze trends. This proactive approach to pressure management enhances operational efficiency, reduces costs, and ensures compliance with safety standards.

Durability is another hallmark of Pressure Systems 9046. Built with high-quality materials, it can withstand harsh environmental conditions, including extreme temperatures and corrosive substances. This robust construction not only extends the lifespan of the system but also reduces maintenance needs, offering long-term reliability.

Moreover, Pressure Systems 9046 supports remote monitoring features, allowing users to access system data and control operations from anywhere. This connectivity simplifies management tasks and contributes to a more streamlined workflow, enabling industries to focus on core operations while ensuring pressure systems are performing optimally.

In conclusion, Pressure Systems 9046 stands out due to its innovative technologies, user-friendly design, and exceptional durability. Its combination of smart pressure regulation, modularity, real-time monitoring, and remote access makes it an indispensable tool for various industries looking to enhance their pressure management strategies. As industries continue to evolve, Pressure Systems 9046 is poised to meet the changing demands of the market, ensuring safe and efficient operations for years to come.
Top Page Image Contents