SEPARATING MAIN UNIT
In order to settle the touch terminal properly in a point of service system, all the cable connections have to be routed through its base, either slim or universal. Therefore, please observe the procedures from A to C below to separate the main unit from both slim and universal base stand assembly after all cables in cable cover disconnected.
C | Step A: Prepare a soft clean flat surface, such | |
B | as a piece of cloth on the desk to seat | |
A | the front surface of main unit | |
| ||
C | Step B: Press the Lock/Release button and | |
meantime ... | ||
B | ||
Step C: Slide the base stand assembly to left to | ||
A | ||
| separate |
OPENING STAND ASSEMBLY
Bottom Plate
Fixing Screw
Push Bottom
Plate This
Way To Open
Auxiliary
Cable Exit
Slim base bottom
Take the
adjustable stand assembly and turn it up side down to show the bottom of the base. Remove the bottom plate fixing screw and push the bottom plate to the right as in these two example pictures at both sides to open.
Bottom Plate
Fixing Screw
Push Bottom
Plate This Way
To Open
Universal base bottom
13 11 1 | 12 |
| Take |
| 1 | 8 |
| |
|
| the bottom plate | 5 |
| 7 | |||
|
| up | and | the |
| |||
|
|
|
|
|
| |||
2 |
| inside | of | an | 6 |
|
| 8 |
|
| example | slim |
|
| |||
|
|
|
|
|
| |||
4 |
| base | model | 6 |
| 4 | ||
| looks | like | this |
| ||||
|
| in | the | left | 2 |
| 3 | |
| 5 | picture. | The |
| ||||
|
|
| ||||||
|
| inside | of | an | 11 |
|
|
|
| 6 | example | 9 | 10 | ||||
|
| |||||||
Inside slim base | universal | base |
| Inside universal base | ||||