POSIFLEX Business Machines Touch Terminal, 5800, 5600 Power ON/OFF, Power Supply, LED Indicator

Page 15

Emergency treatment:

The battery is constructed maintenance free and leakproof. It is well protected in Jiva system as long as the ambient temperature remains below 30°C and the ventilation of the Jiva system remains free. However, should any accident happen and the sulfuric acid from the battery spills on skin or clothing, wash immediately with water. If the acid comes in contact with eyes, rinse eyes with large amount of clean water and see a doctor immediately. A larger external battery may be connected to give an extended operation. Please check your dealer about this capability when required.

WARNING:

If there are any signs of over charging or leakage of electrolyte please contact your dealer immediately

Power Supply

The operating voltage range of the power adaptor should cover the local power supply for proper operation. The power cable, the power outlet and any power fusing arrangements must conform to local safety regulations.

Please never do any connection / disconnection when system is still powered on. Please always keep the external power adaptor in a free air circulation.

POWER ON/OFF

There must always be at least 10 seconds waiting before switching on again once the system is powered off successfully.

LED Indicator

There is an LED in the logo area or under the printed logo and serves for several purposes. The relationship between LED status and other conditions is summarized in following table:

LED Status

System Status

External Power

UPS Battery

Powering Up

Off

Off

Off

Not present

Not possible

Off

Off

Off

Present

Not allowed

Green

Off

On

No influence

Allowed

Blue

On

On

No influence

Not required

Blue/flash

On

Off

Activated

Not required

Green/rapid

On

Off

Running at

Not required

flash

low capacity

 

 

 

Part 15

Image 15
Contents Jiva TP/LT- 5600/5800 Series Touch Terminal User’s Manual Alert to OUR Honorable Customers Daily Maintenance GuideStandard Features User’s ManualProduct Optional Items Part Opening Cable Cover Installation GuidesDisconnecting Cables Opening Stand AssemblySeparating Main Unit Cash Drawer Installing UPS BatteryPreparing the Main Unit Routing the CablesWireless Printer Installing Upgrade KITConnecting Cables Joining Main Unit and StandWall Mounting Location for Installation Operating System RecoveryIDE Cable KIT for Jiva Operating System Installation Operating Environment UPS Battery optionApplication Environment VentilationPower ON/OFF Power SupplyLED Indicator By RTC Alarm preset Automatic Power onHardware Power Switch Software Support FeaturesDisplay Settings LAN BootSystem Monitor TOP Mount Customer DisplaySerial Ports COM1/2/3/4 Sound PortsPosiflex Touch Terminal Manager Mouse EmulationRS232 Touch Controller