VII. DRIVER INSTALLATION
A.INSTALLATION
1. RS232 touch
Please find in the attached Posiflex product information CDROM under subdirectory \Drivers\TM_LM\RS232 for RS232 interface touch controller driver. In case this subdirectory is not found in the CDROM received, please
use identical driver from relevant product such as \Drivers\TP58_TP59\Touch\RS232. In such subdirectory, please then find the proper descendant for the OS applied such as \RSTC_W9x for Win9x system. Click SETUP.EXE to install the driver into system and a utility program for touch calibration. Please select “SmartSet Serial Controller” as the controller type during the installation process. Same approach applies for other operating system.
If, for any reason, the user wants to remove the driver for the RS232 touch controller, please select “Monitor Mouse” in the program list for removal.
2. USB touch
The USB interface touch controller operates as an USB mouse without need for any special driver in Windows. However, there is a program supported for its calibration and touch function manipulation. Please find it in the attached Posiflex product information
For Linux environment, please find the setup program for the suitable kernel in the same directory and install the required driver and calibration program as the setup program proceeds.
B.SETUP/CALIBRATION
1.RS232 touch
Once the RS232 touch controller driver is installed, the user can utilize it to calibrate the touch screen, define mouse button emulation modes, enable right button emulation or define the click sound’s tone and duration. Please go to “Control Panel” and select “Elo Touchscreen” to engage this utility. Most items in this utility should be easily understandable to average user. Followings are just some reminders on some items.
ŸCOM port – This port selection must match exactly the port touch control interface cable is connected to.
ŸAlign – This function engages 3 touch targets at left top, right bottom and right top consecutively for touch calibration.
Part 5