ŸClick on touch – This selection of touch button disables the double click function of a touch and a left click will be registered at the point where a touch on the screen is made even if the touch is dragged to other spot before release.
ŸClick on release – This selection of touch button disables the double click function of a touch and a left click will be registered at the point where a touch is released from the screen.
ŸDrag – This selection of touch button disables the double click function of a touch and a left click contact signal will be sent to the host when a touch is made and a left click release signal will be there for touch release.
ŸDrag, Double click – This selection of touch button allows the screen touch to simulate the complete left button of a mouse.
ŸDouble click size – This adjustment (10 to 100 pixels) is available only when double click function of the touch is enabled. The larger the size is, the easier it is to take 2 consecutive taps on the touch screen at nearly same spot as double click.
ŸShow
2. USB touch
a.USB touch manager
Once the USB control program is installed, the user can utilize it to calibrate the touch screen, define mouse button emulation parameters, enable right button emulation or define the click sound’s tone and duration. Please go to “Program Files” and select “Posiflex USB Touch Tools” and then select “Posiflex USB Touch Manager” within the tools to engage this utility. Most items in this utility should be easily understandable to average user. Followings are just some reminders on some items.
ŸCalibrate – This button engages the “Posiflex USB Touch Calibrator”.
ŸEdge Acceleration – This function engages the “Posiflex USB Touch Edge Acceleration Tool” and helps to find the hidden taskbar or thin scroll bar through touch.
ŸHide Cursor / Show Cursor – This button hides or shows the mouse cursor on screen display. Please never hide cursor before the touch is enabled and calibrated.
ŸBuzz On – This check box together with the 2 list buttons below it
Part 6