POSIFLEX Business Machines CR-4000 Serial O/P DB9M Serial I/P DB9F Parallel I/P DB25M Ground

616P PHONE JACK

POWER CORD

3).Set S1 for security code to open cash drawer. In normal practice, the security code is suggested to be a non-displayable ASCII character. For. example, a hexadecimal number between 01 to 1F. Please refer to rear panel illustration below.

CR4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/ 4213 Rear panel illustration.

AC 12V I/P	PARALLEL O/P (DB25F)		Switch is ON when pushed up
SERIAL O/P (DB9M)			S1	S2
		8	1 4 1
SERIAL I/P (DB9F)		PARALLEL I/P (DB25M)		GROUND

S1 Set security code. (Default Setting: BIT 1,2,3 OFF and BIT 4,5,6,7,8 ON. Security code is 07H)

BIT	1	2	3	4	5	6	7	8
Number to be added to the	1	2	4	8	16	32	64	128
security code if OFF.

S2 BIT1 ON and BIT2 OFF to receive security code via Pin2 of P4 (DB9F). BIT1 OFF and BIT2 ON* to receive security code via Pin3 of P4 (DB9F). BIT3 OFF and BIT4 ON for dedicated RS-232C.

BIT3 ON and BIT4 OFF* for non-dedicated RS-232C. (*denotes factory default setting)

CR4004 / 4104 / 4214

1). Open the PC case. Put the metal

bracket with power connector into one

of the I/O windows. 2). Connect the cable to the HDD type

power connector of PC power supply. See illustration below. Then close the

PC case.

3). Connect the DB-9 connector to the computer's serial port of COM1 (or

COM2). Connect the 4P phone plug connector to the added I/O bracket. See below illustration.

4