LED Connection Cord
The 2-wire connection cord serves to connect light emitting diodes or relays to the LED Connection Mo- dule LAM48-1. The cord is needed if other than the pre-assembled LEDs are used, or if more than two Re- lay Modules RL58-1 or RL58-2 – which can be directly connected to the LED connection module via fl at cable
– have to be actuated.
At one end of the cord there is a connector which fi ts to the pin connector of the LED Connection Module LAM48-1, and the other end of the cord is open.
Specifications
Line length | 2m |
Order number | 259013 |
Order name | Cord 2-Wire for LED Connection/10pcs. LED-LEITUNG-10 |
Building Safety. Building Security.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27 | PTU288-1_DBL_LST_EN_0804.PDF • PAGE 3 |
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED | |
