M A G M A
If your device is not displayed as shown above, you should shut down your system (computer first, then ExpressBox) and reconnect the cables to ensure that you have a solid connection. Restart Magma ExpressBox1, and then restart the computer. Next, try to verify the installation again, as shown above. If you are still having problems contact Magma Technical Support at (858)
Finished
Once you have completed the all the installation steps and successfully verified the installation of the ExpressBox and your 3rd Party Card, you have completed the installation. You are now ready to enjoy using your new Magma product.
Cleaning up
If your installation efforts have left fingerprints or smudges on the ExpressBox case, you can easily clean them using the following simple steps.
1.ExpressBox’s aluminum finish should be cleaned with a soft cloth.
2.If required, the cloth may be dampened with water, or for stubborn spots, a mild diluted soap solution such as Dawn.
CAUTION
DO NOT use commercial cleaners such as 409, or Windex, etc, as they are corrosive to the aluminum finish.
16 | Chapter 2 Hardware Installation |