Linak MJB user manual Repairs, Disposal of LINAK’s products, Component Recycling group

Page 8

Repairs

In order to avoid the risk of malfunction, all repairs must only be carried out by authorised LINAK workshops or repairers, as special tools must be used and special gaskets must be fitted. Products under warranty must also be returned to authorised LINAK workshops.

Warning!

If any of the LINAK products are opened, there will be a risk of subsequent malfunction.

Disposal of LINAK’s products

LINAK’s products may be disposed of, possibly by dividing them into different waste groups for recycling or combustion.

We recommend that our product is disassembled as much as possible at the disposal and that you try to recycle it. As an example of main groups within sorting of waste we can mention the following:

Metal, plastic, cable scrap, combustible material and collection for recoverable resources.

Some of these main groups can be sub-divided into groups e.g. metal can be divided into iron, stainless steel and aluminium and alloy steel. Plastic can e.g. be divided into ABS, PA, PE and PP.

The MJB can be disassembled and sorted into the following recycling groups:

Component

Recycling group

 

 

 

Plastic housing – Plastic recycling or combustion

MJB

 

Cable – Cable scrap or combustion

 

 

 

PC-board – Electronics scrap

 

 

By now all our casted plastic units are provided with an interior code for plastic types and fibre contents, if any.

8

Image 8
Contents MJB Gateway Page Contents Preface Description of the various signs used in this manual Safety instructionsImportant information Residual risk Before installation, re-installation, or troubleshooting Information on the MJBBefore start-up During operationComponent Recycling group RepairsDisposal of LINAK’s products Misc. on the MJB system Warranty and service lifeMaintenance MJB Gateway variant, 504-01 Standard functionalityUsage FeaturesOptions special article Example of Open Loop RelayExample of closed loop Precautions Cable ordering nos. Modular plug open end Following disinfectants/detergents are recommended IP Protection Cleaning instrucionsIP Protection degree Environmental conditions PrecautionEnvironmental conditions Modular plug with wide slit Modular plug with narrow slitKey to symbols ETL LGA Drawing Appendix MJB Modular Junction BoxLinak Application Policy Page Page Factories