Distortion Models
Tube Drive
Based on the Chandler Tube Driver®. The original was designed by keyboardist Brent Butler to add grind and girth to his Farfisa. Utilizing a single 12AX7 preamp tube, the Tube Driver delivers the sweet singing sustain craved by guitarists worldwide.
ATube Drive
DIST
MID
Screamer
DRIVE
TREBLE
BASS
OUTPUT
Based on the Ibanez®
AScreamer
7•2
DIST
TONE
DRIVE
TREBLE
BASS
OUTPUT
•Knob 3 controls Tone, true to the original Tube Screamer’s Tone knob.
Overdrive
Based on the DOD® Overdrive/Preamp 250, which was designed to slam the input of a tube guitar amp as well as add distortion. The original had only gain and level controls, but the M13 adds Bass, Mid and Treble EQ.
A
DIST
MID
Overdrive
DRIVE
TREBLE
BASS
OUTPUT
•You can set Knob 1 at a minimum level on this and other Distortion models to get a boost in level without distorting your tone too much.
*All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6’s sound model development. Tube Driver® is a registered trademark of Butler Audio, Inc. Ibanez® is a registered trademark of Hoshino, Inc. Tube Screamer® is a registered trademark of Hoshino Gakki Co. Ltd. DOD® is a registered trademark of DOD Electronics Corp.