Reverb Models
Reverb Models
This chapter describes the 11 Reverb models we ported from the Line 6 Verbzilla pedal, one of our most popular stomps in the ToneCore family. All Reverbs are stereo, and they sound best routed towards the end of your FX chain.
Parameter Details
As indicated in the Reference Table below, all M13 Reverb models are set up the same way. Mix is persistent for all Reverbs (your Mix level will stay the same when you load a different Reverb model). Knobs 1 thru 5 control the following for all Reverb models:
•Knob 1: Decay time.
•Knob 2:
•Knob 3: No assignment for the Reverb models.
•Knob 4: Overall Tone of the wet reverb signal.
•Knob 5: Mix from 0% (dry) to 100% (at 100% you’ll hear wet reverb signal only)
Reverb Models Reference Table : Controls & Parameters
Model | Knob 1 | Knob 2 | Knob 3 | Knob 4 | Knob 5 |
‘63 Spring | Decay | - | Tone | Mix | |
Spring | Decay | - | Tone | Mix | |
Plate | Decay | - | Tone | Mix | |
Room | Decay | - | Tone | Mix | |
Chamber | Decay | - | Tone | Mix | |
Hall | Decay | - | Tone | Mix | |
Ducking | Decay | - | Tone | Mix | |
Octo | Decay | - | Tone | Mix | |
Cave | Decay | - | Tone | Mix | |
Tile | Decay | - | Tone | Mix | |
Echo | Decay | - | Tone | Mix |
9•1