Filter Models
Throbber
Inspired by the versatile Electrix® Filter Factory. Like the LFO section of the Filter Fac- tory, the Throbber alters the brightness of your tone with an emphasis on a specific fre- quency that you can select. Throbber is perfect for those Electronica sounds.
CThrobber
FILTER
4.80HZ
FREQ
RAMP UP
RAMP DW TRIANGLE SQUARE
Q
MIX
•Knob 1: Frequency: Selects a specific frequency range for the filter.
•Knob 2: Q. Controls the width of the filter.
•Knob 3: Speed. Sets the rate of the low frequency oscillator.
•Knob 4: Mode. Selects between four different wave shapes.
•Knob 5: Mix.
Spin Cycle
8•6
Inspired by Craig Anderton’s
C
FILTER
1.21HZ
Spin Cycle
FREQ
VOLSENS
Q
MIX
•Knob 1: Frequency. Controls the range of the filter emphasis in the wah tone.
•Knob 2: Q. Controls the width of the filter.
•Knob 3: Speed. Sets the speed at which the wah effects sweep.
•Knob 4: Volume Sensitivity. Sets the way volume will affect the speed of the effect.
•Knob 5: Mix.
*All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6’s sound model development. Electrix® is a registered trademark of Electrix Pro, Inc.