Olivetti 120D, 150D manual

Note for loading envelopes

•Envelopes must be fed narrow side into the feed slot one sheet at a time.

•Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use envelopes that are filled with air or envelopes that have labels or stamps attached.

•Envelopes of which the surface is not flat because of embossing may cause the prints to become smudged.

•Under high humidity and temperature conditions the glue flaps on some envelopes may become sticky and be sealed closed when printed.

•Use only envelopes which are flat and crisply folded. Curled or poorly formed envelopes may be poorly printed or may cause misfeeds.

•Be sure to select either Com10, DL, C5 or Monarch on the paper size setting of the printer driver. (For detailed information on printer driver, refer to the online manual.)

•It is recommended that you perform a test print before performing the actual print job.

18