Olivetti 120D, 150D Select two-sided copy mode, Using the original table, Press the start key

2

3

Select two-sided copy mode.

Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 53.

Select the copy settings. See "SET THE COPY QUANTITY" (p.49), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.50), and "REDUCTION/ENLARGEMENT/ZOOM" (p.52).

Using the original table

If you are using the original table, copying is only possible in one sided to two-sided mode ("A" above).

1Press the start () key.

The original is scanned into the unit's memory.

2Place the original that you wish to copy onto the rear side of the paper, and press the start () key again.

Copying begins.

Using the SPF

Press the start () key. Copying begins in the selected two-sided copy mode.

54