Nu Technology manual 1 JP1 on cPCI-6760DK/P5, Setting Function, Pin # Signal Function

Note There are no jumper settings for front side bus (FSB) and CPU speed selection because the cPCI-6760DK/P5 is equipped with a pre-soldered BGA2 CPU that is mounted during SMT manufacturing.

2.1.1 JP1 on cPCI-6760DK/P5

	JP1		Setting	Function
			Pin 1-2	Clear CMOS
1		3	Short/Closed	Content
			Pin 2-3	Normal Operation
1		3	Short/Closed	(Default)

Table 3: JP1 Clear CMOS content

2.1.2Keyboard and Mouse Combo Connector (CN4) on the cPCI-6760DK/P5

Pin #	Signal	Function
1	KBDATA	Keyboard Data
2	MSDATA	Mouse Data
3	GND	Ground
4	+5V	Power
5	KBCLK	Keyboard Clock
6	MSCLK	Mouse Clock

Table 4: Keyboard/Mouse Combo Connector (CN4) on cPCI-6760DK/P5 front board

Note: User can use a Y-cable for connecting PS/2 keyboard and mouse on this connector. User also can directly connect a PS/2 keyboard on this connector when mouse is not needed.

Jumpers and Connectors ∙ 17