4.1.3 Driver Installation on Windows NT
Windows NT may install the standard VGA driver. We recommend you to manually installed the most updated driver, which is shipped with the ADLINK CD to guarantee compatibility. After installing Windows NT, please update to the new driver by following these procedures.
1.From the Control Panel,
2.Click the Settings tab, click Display Type…, click Change… button.
3.Insert ADLINK CD and click Have Disk.
4.Browse the SM721 driver in the following path: X:\CHIPDRV\VGA\SM721\WINNT40, highlight smisetup.inf, click OPEN. Click OK.
5.A windows will appear and will shows the Display is Silicon Motion Lynx Family, click OK, then click Yes to continue.
6.An Installing Driver window appears indicating a successful installation, click OK to continue.
7.Click Close button.
8.Click Close button, then restart the computer to activate the new driver.
Note: After installing the VGA/AGP drivers, and you find the driver does not work. This maybe due to not installing the NT service pack in advance. We suggest installing NT service pack 4 or higher to enable AGP capability.