4.2.4 Driver Installation on Windows NT
Before install the LAN driver on Windows NT, please copy the LAN driver in the CD to a floppy diskette. You have to put a new disk into drive A, then type the following batch command under the DOS environment to copy the relative NT drivers.
X:\CHIPDRV\LAN\100PDISK\Makedisk\Makedisk NT
where X is the
Windows NT may ask to installs a LAN driver from its own library of drivers. We recommend you to manually update to the new LAN driver, which comes with the ADLINK CD to guarantee compatibility. After installing Windows 98, please update to the new driver by following these procedures.
1.From the Control Panel,
2.In Network Setup Wizard, click Next>, click Select From List… button.
3.Insert LAN driver floppy diskette into A drive and click Have Disk.
4.In the dialog box of Insert Disk window, type in A:, Click OK.
5.A Select OEM Option window pops up, click OK, then click Next>.
6.Select necessary Network Protocols, click Next>.
7.Select necessary Network Services, click Next>.
8.Click Next> until Window NT Setup dialog box pop up. Type in D:\i386 in the dialog box, then insert the original Windows NT CD, click Continue.
9.Then click OK until the setup is completed.
10.Reboot the computer.