Nu Technology manual Features, Specifications of the cPCI-6760DK/P5

1.3Features

∙PICMG 2.0 CompactPCI Specification R.3.0 Compliant

∙PICMG 2.7 CompactPCI Dual System Bus specification R1.0 compliant

∙Standard 6U form factor, 1-slot (4TE/HP) width

∙Pre-mounted low voltage BGA2 Pentium-III 500MHz CPU with 100MHz

FSB

∙Pre-installed 64MB 144-pin SO-DIMM PC-100 RAM, support up to 512MB

∙Build-in housing for 2.5” low profile HDD

∙Supports up to 1 USB ports, 1 serial port, 1 parallel port, 1 floppy interface

∙Supports 14 bus-master PCI devices on CompactPCI bus peripheral slots

∙On-board high performance AGP 2x VGA display output by SMI SM721 controller

∙Supports up to dual 10/100Mb Ethernet ports

∙Supports Intel pre-boot execution environment (PXE) for boot from LAN

∙Pre-installed CompactFlash type-II socket via removable daughter board

∙Supports remote console on Serial ports

1.4Specifications

1.4.1 Specifications of the cPCI-6760DK/P5

General CompactPCI Features

∙PCI Rev.2.1 compliant

∙PICMG 2.0 CompactPCI Specification R.3.0 Compliant

∙PICMG 2.7 CompactPCI Dual System Bus specification R1.0 compliant

Form Factor

∙Standard 6U CompactPCI (board size: 233.35mm x 160mm)

∙1-slot (4 TE/HP, 20.32mm) width, incl. housing of 2.5” HDD

CPU/Cache

∙Intel BGA2 Low Voltage Pentium III with 256KB on-die L2 cache @ 500MHz speed & 100MHz FSB

4 ∙ Introduction