Oce North America TCS400 specs

How to start the Optimise print quality wizard

1Press the on-line / off-line key (key 4 on the folded cover) to set the printer off-line.

2Press the lower softkey for 'Optimise print quality' (key 6 on the folded cover) to enter the wizard.

3Follow the steps of the wizard.

4When there are no defective printheads, you can do a printhead alignment. When you select 'No', the system returns to the off-line menu.

5When there are printheads with defective nozzles, you can not do a printhead alignment.

When there are printheads with defective nozzles, you can do the following.

■Continue the printing without the enabling of the fallback mode. The output quality is not optimal.

■Enable the fallback mode to continue the printing with optimal output quality.

■Enter the 'Replace printhead' wizard to replace the defective printhead.

Self support tips (GB)