NorthStar Navigation 8000I operation manual Customize the radar screen, Change the radar palette

Page 136

23 Customize the radar screen

The following choices apply only to your Radar screen. You can show or hide the:

•North indicator

•heading marker

•range rings

•active waypoint

•active route

•waypoint or route details

You can also change the color palette.

23.1Change the radar palette

You can change the color of the radar palette.

To change the radar palette:

1.Display the Radar screen and control panel. If you can't see the

Presentation button, select Return.

2.Select Presentation.

3.The Palette button shows the current setting. Select the button if you want to change the setting and a drop down list of choices appears.

4.Select the new setting. The new setting is applied immediately and stays until you change it again.

5.When you are finished, select Return.

23.2Show/hide the North indicator

Whatever the Radar screen orientation, you can always show a North indicator at the edge of the compass range ring. The North indicator is a short, white arrow.

If the bearing mode is set to magnetic, the North indicator always points to magnetic North.

If the bearing mode is set to true, the North indicator always points to true North. You can toggle the North indicator On or Off. On the default.

To change the north indicator line setting:

1.Display the Radar screen and the control panel. If you can't see the

Range and Bearing button, select Return.

2.Select Range and Bearing.

3.The Show North Indicator button shows the current setting. Select the button if you want to toggle to the other setting. The new setting is shown immediately and stays until you change it again.

4.When you are finished, select Return.

136

Northstar 8000i Operation Manual

Page 135 Page 137
Image 136
Page 135 Page 137
Contents Northstar Important Safety and Warning Information Important Safety InformationPage Minimum safe Vertical beam Distance Watts per m² Scanner Warranty DisclaimerContents Chart Set up the chart library Use the chart views 3D Steer Sounder 101 Radar 123 Measure range and bearing 139 Entertainment 162 Video jukebox options 179 Glossary Welcome to the Northstar NetworkingHow to use this manual ConventionsIntroduction to the Northstar Turn onTurn off To turn off the 8000i using a 12 Display ProcessorKeys on the 15 inch Monitor Menu Keys on the remote keypad ControlKeys on the 12 inch Display Processor How to select an item ButtonsSingle pane options To select an item with the touch screenWhat is the active pane? What are pages?Expand a small pane Cycle through the panes on aEdit a Select aSounder, Cruising, and Fishing Adjust the brightness on the 15 inch Monitor Set up the Northstar 8000i basicsAdjust the brightness on a 12 inch Display Processor Turn the keypad beeps on or off Adjust the volumeTurn the keypad backlight on or off Select a palette Show/hide the control panelShow/hide the instruments bar Show/hide the top control barSelect the time format When you are finished, select InstallationSelect your time zone Select the large scale distance units Select the temperature unitsSelect the small scale distance units Select the depth units Select the volume units for liquidsSelect the speed units Select the pressure units When you are finished, select Vessel StatisticsSpecify your vessel statistics Chart Set up the chart library Display the C-MAP MAX Pro Chart Manager screenWhat does the C-MAP PRO Chart Manager screen show? Select + Chart Select C-Map Chart ManagerChart Manager control panel Chart Manager iconsCollection is installed on Different ways to choose a chart collection Information on C-Map chart licenses and subscriptionsPurchase or rent? Page Purchase a chart license over the internet Purchase a chart license over the phonePurchase a chart license through a dealer Install the chart data Load the chart licensesSelect + Chart, then C-Map Chart Manager Touch Install All in Control Panel Touch Install SelectedUpdate charts over the internet Uninstall chart collections Update the database by DVDEnter C-Map MAX Pro Chart Manager Page Display the chart screen Chart screen basicsTo display the chart screen You can either What does the chart screen show? Display your current position in real time Display your current position dataInstant GoTo GoTo or show a Lat/Long coordinatePan the chart Zoom in or out on a chart screenZoom in or out on part of a chart screen What is the chart orientation? Change the chart viewThere are three choices of chart orientation Change the chart orientation What is the vessel offset mode?Select the level of chart detail Select the vessel offset modeShow details about an object on the chart Show range and bearing between two points Show range and bearing from your vesselDistance button, select Return Select Distance and a new control panel appears Customize the chart screen What is the course predictor line?Show Predictor button, select Settings Show/hide the course predictor lineKeep your vessel in view on the chart screen Select the vessel symbolWhat is the chart guard zone? Settings button, select Return Select SettingsSet up the chart guard zone Turn the chart guard zone on or offSelect the default icon for a waypoint Select the default icon for an event markGuard Zone button, select Settings Set the deep water contourChart Presentation button, select Settings Show/hide the chart boundariesShow/hide your current track Show/hide shade safe depths Select Chart Presentation, then select More Chart SettingsShow/hide the Lat/Long grid overlay Select Chart Overlays What are light sectors?Show/hide the light sectors Show/hide tidal flow and currentsDefault settings for the chart views Use the chart viewsFive chart views have the following default settings Page Overlay the radar Use the chart overlaysTransmit Adjust the settings for the radar Change the radar modeAdjust the radar opacity Select Chart Overlays, then select Radar SettingsOverlay the ports and marinas Overlay satellite or aerial photosOverlay roads, terrain, SAR and/or Gmdss areas Select Chart Overlays, then More Overlays Create a waypoint Use waypointsCreate an event mark Hide a waypoint Select and show a waypoint on the chartDelete a waypoint Stop navigating to a waypoint Navigate to a waypoint10.8 Set/remove the warning zone for a waypoint Display the waypoint details Find a waypointSelect the waypoint, then select Waypoint Details Change the waypoint details Display the waypoints libraryDelete a waypoint from the Waypoints Library Use routes and waypoints Copy an existing routeƒ Off, a new waypoint is located exactly where you choose Create a new routeMove a waypoint in a route When you are finished, select FinishAdd a new waypoint into a route Add a waypoint to the start or end of the route Remove a waypoint from a route using the Routes Library Remove a waypoint from a route using the Chart screenChange the order of the waypoints in a route Add an existing waypoint to a routeƒ select Edit Route then select Remove Waypoint ReturnSelect and follow a route from the Routes Library Display the Routes LibrarySelect and follow a route with GoTo Follow a route Navigate to the previous or next waypointStop following a route Select the route that you want to follow, then select OKDelete a route Hide an inactive routeReverse your route Select GoTo then select Reset XTE Reset the XTE on an active route or waypointDisplay and/or change the route details Set up routes to be shown or hidden Show the route length and estimated travel timePage Set up navigation Select the bearing modeSelect the variation source Set the manual variationSet the look ahead distance to update chart Select the position data formatSet the center circle to update chart Set the angle delay to update the chart Set the waypoint arrival distanceSelect whether to continue navigating at the route end Display the 3D Chart screen Introduction to 3D ChartReposition the 3D Chart screen to show your vessel Rotate the view of the 3D Chart manually Pan the 3D Chart to show new areasChange the azimuth setting on 3D Chart Change the camera angle for 3D Chart Change the elevation manuallyEnhance the vertical scale Change the vessel modeShow/hide the bathymetric data Overlay satellite or aerial photos on 3D Chart Synchronize 3D Chart and the chart screenPage When to reset the XTE 14 3D SteerDisplay the 3D Steer screen What does 3D Steer show?100 Use the sounder SounderHow the sounder works Display the sounder screen What does the sounder screen show?Change the scroll speed What does the sounder status bar show?Depth at the current cursor position Change the palette Palette button, select SettingsShow/hide the depth value Change the sounder operating mode Auto Mode button, select ReturnShow/hide the depth line Move the depth lineWhen to use 50 kHz, 200 kHz, or mixed frequency Select a split 50/200 kHz screen Select 50 kHz, 200 kHz or mixed frequency screenFrequency button, select Return Select a split zoom screen What is zoom range and zoom range shift?Change the zoom range shift Select a split bottom lock screen Change the ratio of a split screenWhat is the A-Scope? Show/hide the A-Scope Change the ratio of the A-ScopeProblems with fish arches? How to interpret the sounder screensWhat are fish arches? How to recognize different types of fish How to recognize and avoid shadowsHow to recognize the type of bottom How the water depth and scroll speed affect the historyFactors that affect the echo strength What is gain? Change the gain settingChange the sounder range and gain Gain and Filters button, select ReturnWhat is the gain threshold? Change the gain thresholdTurn the auto range on or off What is auto range and range shift?Auto Range can be set On or Off Change the range Change the range shiftRange, Zoom and Split button, select Return Set up the sounder Change the transducer depthChange the water temperature averaging time Change the water temperature offsetChange the sounders speed offset Change the zoom range Change the sounders speed filterReturn Select Range, Zoom, and Split 122 How the radar works RadarWhat are the radar modes? 124 Display the radar screen Use the radarStart the radar transmitting Stop the radar transmitting What does the radar screen show?What is the radar orientation? What does the radar status bar show?Change the radar orientation Change the radar range offsetCustomize the position of the PPI center Orientation button, select ReturnSet the PPI position to Look Ahead or Center Select True or Relative Motion modeOrientation button, select Return Select Orientation Reset the TM position Adjust Radar button, select Return Select Adjust Radar Change the radar gain modeOptimize the quality of the radar display What is sea clutter? Change the radar gain settingChange the sea clutter mode Change the sea clutter setting What is rain clutter?Reduce interference from other radars Change the rain settingPresentation button, select Return Select Presentation 135 Customize the radar screen Show/hide the North indicatorChange the radar palette Show/hide the range rings Show/hide the heading markerShow/hide the active waypoint on radar Show/hide the active route on radar Show/hide waypoint or route details on radarFind range and bearing with the cursor Measure range and bearingShow/hide a VRM/EBL Find range and bearing with fixed VRM/EBL Find range and bearing with floating VRM/EBL Set the EBL reference bearing Make small targets more easy to see Target presentationTurn off or customize target trails Remove target trails from the radar What is a radar guard zone? Use the radar guard zonesTurn a radar guard zone on or off Guard Zones button, select Return Select Guard ZonesCustomize a radar guard zone Set the sensitivity of the radar guard zone alarmGuard Zones button, select Return 147 Set up the radar Change the radar startup modeWhen you are finished, select Radar Change the radar antenna heightChange the range of the radar Change the radar bearing alignment150 Choose how to view the instruments InstrumentsSelect an instrument panel Rename an instrument panelSelect the color scheme for an instrument panel Change the layout of the instrument panelResize an instrument Select Panel button, select ReturnAdd an instrument When you are finished, select Save Changes Create an instrument panelDelete an instrument Delete an instrument panelSelect Config, then select Panel Config Which alarms can be changed? AlarmsView the current settings for an alarm Change the upper or lower trigger settings for an alarm Turn an alarm On/OffSet the alarm audio Set the delay for an alarm Trigger an alarm in case of a loss of input data View the alarm logAcknowledge one or more alarms Acknowledge AllReset an alarm Set an anchor alarmEntertainment Show multiple entertainment panes Turn the volume up or downWhat file formats are supported? Manage your media files with a portable drive Copy media files to a portable driveCopy media files from a portable drive Delete media files from a portable drive Play media files from a portable driveFiles must be in WMA, MP3, MPEG, WMV or AVI format 167 Delete an item from the music library EntertainmentDelete a video from the video library Use the music jukebox Select and play music from the jukeboxRepeat the whole album or playlist in the jukebox Pause playing music from the jukeboxPlay the previous or next track in the music jukebox Change an albums cover art Create and name a new playlistTo change an albums cover art To create a new playlistChange a playlist Play tracks randomly in the album or playlistDelete a playlist Select Create/Edit Playlist, then choose Select PlaylistEdit an item in the music library View the music detailsSelect and play a playlist Queue more music35 CD/DVD options Play a music CDSet random play On/Off on a music CD Select a particular track on a music CDSet repeat play On/Off on a music CD Play the previous or next track on a music CDPause playing a music CD Resume playing a music CDStop and eject a music CD Select and play a video Video jukebox optionsYou can use the video jukebox options to Play a video in full screen mode Pause or resume playing a videoStop or restart a video Fast forward a videoRewind a video Set repeat play On/Off for a videoPlay a different video To play a different videoPlay a DVD in full screen mode DVD optionsPlay a DVD Show the DVD menuPlay or resume playing a DVD Stop or restart a DVDPlay the previous or next scene on a DVD Fast forward a DVDStop and eject a DVD Rewind a DVDTo rewind a DVD Change the automatic ejection setting for music CDs Set the volume levels for the entertainment applicationsWhen you are finished, select Entertainment Manage your Media LibrariesSet the location of the media library Video Aux What video formats are supported?Select and play the Video Aux In source Select the audio source for Video AuxPlay Video Aux In in full screen mode View the camera in full screen mode CameraWhat types of camera are supported? Add the camera to the networkHow to clean the touch screen How to clean a display unitRestore settings and information Maintain the NorthstarTechnical support, service and repairs Find the software version numberUpgrading the 8000i system Select Calibrate next to Calibrate Touch ScreenThere two types of upgrade for a 8000i processor Troubleshooting Touch screen is inaccurateCamera screen goes blank or camera isnt available Sounder Bottom is not displayedRadar overlay doesnt appear on the chart screen Radar shows random signals in centerRadar shows random or grouped dots Radar shows different patterns on each sweepCharts wont display 42.14 3D Chart wont display photo overlays42.15 3D Chart photo overlays switch off Radar shows false echoes and/or background noiseRestore routes, tracks, and waypoints Restore global settingsSelect Restore Global Settings Select Routes Tracks and WaypointsRestore local settings Select Restore Local SettingsGray screen with message Master name unavailable See Networking the 8000i for more informationGlossary Final waypoint in a route Type of fuel. See also gasoline and petrolAn advanced home theatre sound Representation of a fish on the screen as a raw echo returnMethod of displaying information without using colour Unit of volume equal to 1.20094 US gallonsType of fuel Way of grouping music by style, e.g. Rock, ClassicalUnit of volume Disable the audio outputCamera attached to the mast List of options displayed on screenChart is displayed with North at the top of the screen Advance to the next track of the CD or DVDWaypoint that you are steering towards Play the selected track or tracksPower output of the sonar transmission Range and bearing between two points selected on the chartSee Range Charting Set of software instructions for a computerSetting to display the track of the boat over the chart List of stored routesSpeed at which the display moves across the screen An area that cannot be reached by the sonar pulseSudden change of temperature over a short vertical distance Unit of volume equal to 0.833 Imperial gallonsList of tracks recorded and stored on the database List of stored waypoints in the databaseArea of the display that is enlarged Portion of the display screen that shows the zoomed areaIndex 124 168 206 208 209 147 56, 71 211 212 Man Overboard Page United States Europe Northstar
Related manuals
Manual 45 pages 16.7 Kb

8000I specifications

The NorthStar Navigation 8000i is a sophisticated marine navigation solution designed to enhance the safety and efficiency of marine operations. Utilizing the latest technology and innovative features, the 8000i provides users with a comprehensive navigation tool that is both user-friendly and highly reliable.

At the heart of the NorthStar 8000i is its advanced GPS integration, which delivers precise positioning and navigation capabilities. The system supports multiple satellite systems, allowing for exceptional accuracy and reliability in determining a vessel's location, even in challenging conditions. The 8000i uses Differential GPS (DGPS) to further improve positional precision, making it suitable for commercial vessels and recreational boaters alike.

One of the standout features of the NorthStar 8000i is its large, high-resolution color display, which presents information in a clear and accessible manner. The screen offers customizable layouts, allowing users to prioritize the data they find most critical. The interface is designed with simplicity in mind, enabling users to access navigation tools, charts, and other features quickly and easily.

The NorthStar 8000i is equipped with advanced cartography options, including support for a variety of chart formats. Users can choose between vector and raster charts, ensuring that they can find the best option for their specific needs. The system also supports both local and regional data, providing an extensive coverage area for vessels operating in different waters.

In terms of connectivity, the 8000i features integrated networking capabilities, allowing it to interface seamlessly with other marine electronics such as radar systems, autopilots, and AIS transceivers. This interoperability enhances situational awareness and provides a comprehensive picture of the marine environment around the vessel.

The rugged design of the NorthStar 8000i ensures that it can withstand the challenging conditions often encountered at sea. Built to be weatherproof and durable, this navigation system is ready for any marine adventure.

To summarize, the NorthStar Navigation 8000i combines cutting-edge GPS technology with user-friendly designs and exceptional features, making it a top choice for navigators seeking reliable marine navigation solutions. With its accuracy, customizable interfaces, and robust construction, the 8000i is engineered to meet the diverse needs of modern sailors, whether for leisure or professional undertakings.
Top Page Image Contents