Control Module Functions

Control Module Front Panel

Power

Indicator Lamp

CAMERA Connector	A 10 pin connector socket that accepts con-
	nection of the keyed 10-pin quick disconnect
	plug end from the multi-conductor Handpiece
	cable. Makes connection between the Camera
	Handpiece and Control Module to provide power,
	video output and control for the camera..
Power Indicator Lamp	A green LED lamp that illuminates to indicate
	the presence of 12 VDC operating power from
	the power supply adapter..
STANDBY/ON Switch	A rocker panel switch that controls the application
	of 12 VDC operating power from the Power Supply
	Adapter..
	When set in the ON position, the 12 VDC is
	applied, the LED power indicator lamp illuminates,
	and the camera is operational..
	The 12 VDC is removed and the camera is
	turned off when the switch is set in the STANDBY
	position and the LED power indicator lamp
	extinguishes..
Control Module Rear Panel

Connectors

12 VDC Connector	Provides connection of the 12 VDC operating
	power from the Power Supply Adapter..
S-VIDEO Connector	A 4-pin Mini DIN connector that provides output
	connection for S-Video peripherals (e..g. video
	monitor or computer with capture card)..
VIDEO Connector	An RCA connector that provides connection for
	composite video peripherals (e..g. video monitor
	or computer with capture card)..
USB Connector	A USB type B connector that provides connection
	to the USB 2..0 High Speed port of the computer..