NorthStar Navigation 8000I operation manual Pan the 3D Chart to show new areas

Page 94

13.3Pan the 3D Chart to show new areas

You can pan (move) the 3D Chart screen in any direction to show an area that's outside the currently displayed area. The Show Vessel button toggles Off

automatically as soon as start to pan.

To pan the 3D Chart screen:

1.Display the 3D Chart screen and the control panel.

2.Press a directional arrow key once to move the 3D Chart screen one step in that direction, or hold down to scroll the 3D Chart screen rapidly in that direction.

If you have a touch screen, just touch the area at the edge of the 3D Chart screen once to move the 3D Chart screen one step in that direction, or keep touching to scroll the 3D Chart screen rapidly in that direction.

3.Stop when you can see the new part of the 3D Chart screen that you want.

13.4Rotate the view of the 3D Chart manually

You can rotate the current view of the 3D Chart screen to show the view from a different direction either manually as explained here, or by using the Azimuth setting

Your elevation does not change when you rotate the 3D Chart screen. It's most effective to rotate the 3D Chart screen when you're viewing it from a high angle,

The view rotates around the center of the lower half of the 3D Chart screen.

To rotate the 3D Chart screen manually:

1.Display the 3D Chart screen and the control panel.

2.Select a location (other than the center of the lower half of the 3D Chart screen), then drag this in the direction that you want to move. The 3D Chart screen will rotate in that direction.

3.Stop when you have rotated the 3D Chart screen to the view that you want.

13.5Change the azimuth setting on 3D Chart

You can rotate the current view of the 3D Chart screen to show the view from a different direction either by using the Azimuth setting as explained here, or by manual rotation (See Page 94)

Your elevation does not change when you rotate the 3D Chart screen. It's most effective to rotate the 3D Chart screen when you're viewing it from a high angle, (See Page 95)

The view rotates around the center of the lower half of the 3D Chart screen.

To change the azimuth setting:

1. Display the 3D Chart screen and the control panel.

94

Northstar 8000i Operation Manual

Page 93 Page 95
Image 94
Page 93 Page 95
Contents Northstar Important Safety and Warning Information Important Safety InformationPage Minimum safe Vertical beam Distance Watts per m² Scanner Warranty DisclaimerContents Chart Set up the chart library Use the chart views 3D Steer Sounder 101 Radar 123 Measure range and bearing 139 Entertainment 162 Video jukebox options 179 Glossary Welcome to the Northstar NetworkingHow to use this manual ConventionsIntroduction to the Northstar Turn onTurn off To turn off the 8000i using a 12 Display ProcessorKeys on the 15 inch Monitor Menu Keys on the remote keypad ControlKeys on the 12 inch Display Processor Single pane options How to select an itemButtons To select an item with the touch screenWhat is the active pane? What are pages?Expand a small pane Cycle through the panes on aEdit a Select aSounder, Cruising, and Fishing Adjust the brightness on the 15 inch Monitor Set up the Northstar 8000i basicsAdjust the brightness on a 12 inch Display Processor Turn the keypad beeps on or off Adjust the volumeTurn the keypad backlight on or off Show/hide the instruments bar Select a paletteShow/hide the control panel Show/hide the top control barSelect the time format When you are finished, select InstallationSelect your time zone Select the large scale distance units Select the temperature unitsSelect the small scale distance units Select the depth units Select the volume units for liquidsSelect the speed units Select the pressure units When you are finished, select Vessel StatisticsSpecify your vessel statistics Chart What does the C-MAP PRO Chart Manager screen show? Set up the chart libraryDisplay the C-MAP MAX Pro Chart Manager screen Select + Chart Select C-Map Chart ManagerChart Manager control panel Chart Manager iconsCollection is installed on Different ways to choose a chart collection Information on C-Map chart licenses and subscriptionsPurchase or rent? Page Purchase a chart license over the internet Purchase a chart license over the phonePurchase a chart license through a dealer Install the chart data Load the chart licensesSelect + Chart, then C-Map Chart Manager Touch Install All in Control Panel Touch Install SelectedUpdate charts over the internet Uninstall chart collections Update the database by DVDEnter C-Map MAX Pro Chart Manager Page Display the chart screen Chart screen basicsTo display the chart screen You can either What does the chart screen show? Instant GoTo Display your current position in real timeDisplay your current position data GoTo or show a Lat/Long coordinatePan the chart Zoom in or out on a chart screenZoom in or out on part of a chart screen What is the chart orientation? Change the chart viewThere are three choices of chart orientation Change the chart orientation What is the vessel offset mode?Select the level of chart detail Select the vessel offset modeShow details about an object on the chart Show range and bearing between two points Show range and bearing from your vesselDistance button, select Return Select Distance and a new control panel appears Show Predictor button, select Settings Customize the chart screenWhat is the course predictor line? Show/hide the course predictor lineWhat is the chart guard zone? Keep your vessel in view on the chart screenSelect the vessel symbol Settings button, select Return Select SettingsSet up the chart guard zone Turn the chart guard zone on or offGuard Zone button, select Settings Select the default icon for a waypointSelect the default icon for an event mark Set the deep water contourChart Presentation button, select Settings Show/hide the chart boundariesShow/hide your current track Show/hide shade safe depths Select Chart Presentation, then select More Chart SettingsShow/hide the Lat/Long grid overlay Show/hide the light sectors Select Chart OverlaysWhat are light sectors? Show/hide tidal flow and currentsDefault settings for the chart views Use the chart viewsFive chart views have the following default settings Page Overlay the radar Use the chart overlaysTransmit Adjust the radar opacity Adjust the settings for the radarChange the radar mode Select Chart Overlays, then select Radar SettingsOverlay the ports and marinas Overlay satellite or aerial photosOverlay roads, terrain, SAR and/or Gmdss areas Select Chart Overlays, then More Overlays Create a waypoint Use waypointsCreate an event mark Hide a waypoint Select and show a waypoint on the chartDelete a waypoint Stop navigating to a waypoint Navigate to a waypoint10.8 Set/remove the warning zone for a waypoint Display the waypoint details Find a waypointSelect the waypoint, then select Waypoint Details Change the waypoint details Display the waypoints libraryDelete a waypoint from the Waypoints Library Use routes and waypoints Copy an existing routeƒ Off, a new waypoint is located exactly where you choose Create a new routeMove a waypoint in a route When you are finished, select FinishAdd a new waypoint into a route Add a waypoint to the start or end of the route Remove a waypoint from a route using the Routes Library Remove a waypoint from a route using the Chart screenƒ select Edit Route then select Remove Waypoint Change the order of the waypoints in a routeAdd an existing waypoint to a route ReturnSelect and follow a route from the Routes Library Display the Routes LibrarySelect and follow a route with GoTo Stop following a route Follow a routeNavigate to the previous or next waypoint Select the route that you want to follow, then select OKDelete a route Hide an inactive routeReverse your route Select GoTo then select Reset XTE Reset the XTE on an active route or waypointDisplay and/or change the route details Set up routes to be shown or hidden Show the route length and estimated travel timePage Set up navigation Select the bearing modeSelect the variation source Set the manual variationSet the look ahead distance to update chart Select the position data formatSet the center circle to update chart Set the angle delay to update the chart Set the waypoint arrival distanceSelect whether to continue navigating at the route end Display the 3D Chart screen Introduction to 3D ChartReposition the 3D Chart screen to show your vessel Rotate the view of the 3D Chart manually Pan the 3D Chart to show new areasChange the azimuth setting on 3D Chart Change the camera angle for 3D Chart Change the elevation manuallyEnhance the vertical scale Change the vessel modeShow/hide the bathymetric data Overlay satellite or aerial photos on 3D Chart Synchronize 3D Chart and the chart screenPage Display the 3D Steer screen When to reset the XTE14 3D Steer What does 3D Steer show?100 Use the sounder SounderHow the sounder works Display the sounder screen What does the sounder screen show?Change the scroll speed What does the sounder status bar show?Depth at the current cursor position Change the palette Palette button, select SettingsShow/hide the depth value Show/hide the depth line Change the sounder operating modeAuto Mode button, select Return Move the depth lineWhen to use 50 kHz, 200 kHz, or mixed frequency Select a split 50/200 kHz screen Select 50 kHz, 200 kHz or mixed frequency screenFrequency button, select Return Select a split zoom screen What is zoom range and zoom range shift?Change the zoom range shift Select a split bottom lock screen Change the ratio of a split screenWhat is the A-Scope? Show/hide the A-Scope Change the ratio of the A-ScopeProblems with fish arches? How to interpret the sounder screensWhat are fish arches? How to recognize the type of bottom How to recognize different types of fishHow to recognize and avoid shadows How the water depth and scroll speed affect the historyFactors that affect the echo strength Change the sounder range and gain What is gain?Change the gain setting Gain and Filters button, select ReturnWhat is the gain threshold? Change the gain thresholdTurn the auto range on or off What is auto range and range shift?Auto Range can be set On or Off Change the range Change the range shiftRange, Zoom and Split button, select Return Set up the sounder Change the transducer depthChange the water temperature averaging time Change the water temperature offsetChange the sounders speed offset Change the zoom range Change the sounders speed filterReturn Select Range, Zoom, and Split 122 How the radar works RadarWhat are the radar modes? 124 Display the radar screen Use the radarStart the radar transmitting Stop the radar transmitting What does the radar screen show?What is the radar orientation? What does the radar status bar show?Customize the position of the PPI center Change the radar orientationChange the radar range offset Orientation button, select ReturnSet the PPI position to Look Ahead or Center Select True or Relative Motion modeOrientation button, select Return Select Orientation Reset the TM position Adjust Radar button, select Return Select Adjust Radar Change the radar gain modeOptimize the quality of the radar display What is sea clutter? Change the radar gain settingChange the sea clutter mode Change the sea clutter setting What is rain clutter?Reduce interference from other radars Change the rain settingPresentation button, select Return Select Presentation 135 Customize the radar screen Show/hide the North indicatorChange the radar palette Show/hide the range rings Show/hide the heading markerShow/hide the active waypoint on radar Show/hide the active route on radar Show/hide waypoint or route details on radarFind range and bearing with the cursor Measure range and bearingShow/hide a VRM/EBL Find range and bearing with fixed VRM/EBL Find range and bearing with floating VRM/EBL Set the EBL reference bearing Make small targets more easy to see Target presentationTurn off or customize target trails Remove target trails from the radar Turn a radar guard zone on or off What is a radar guard zone?Use the radar guard zones Guard Zones button, select Return Select Guard ZonesCustomize a radar guard zone Set the sensitivity of the radar guard zone alarmGuard Zones button, select Return 147 When you are finished, select Radar Set up the radarChange the radar startup mode Change the radar antenna heightChange the range of the radar Change the radar bearing alignment150 Select an instrument panel Choose how to view the instrumentsInstruments Rename an instrument panelResize an instrument Select the color scheme for an instrument panelChange the layout of the instrument panel Select Panel button, select ReturnAdd an instrument Delete an instrument When you are finished, select Save ChangesCreate an instrument panel Delete an instrument panelSelect Config, then select Panel Config Which alarms can be changed? AlarmsView the current settings for an alarm Change the upper or lower trigger settings for an alarm Turn an alarm On/OffSet the alarm audio Set the delay for an alarm Trigger an alarm in case of a loss of input data View the alarm logAcknowledge one or more alarms Acknowledge AllReset an alarm Set an anchor alarmEntertainment Show multiple entertainment panes Turn the volume up or downWhat file formats are supported? Manage your media files with a portable drive Copy media files to a portable driveCopy media files from a portable drive Delete media files from a portable drive Play media files from a portable driveFiles must be in WMA, MP3, MPEG, WMV or AVI format 167 Delete an item from the music library EntertainmentDelete a video from the video library Use the music jukebox Select and play music from the jukeboxRepeat the whole album or playlist in the jukebox Pause playing music from the jukeboxPlay the previous or next track in the music jukebox To change an albums cover art Change an albums cover artCreate and name a new playlist To create a new playlistDelete a playlist Change a playlistPlay tracks randomly in the album or playlist Select Create/Edit Playlist, then choose Select PlaylistEdit an item in the music library View the music detailsSelect and play a playlist Queue more musicSet random play On/Off on a music CD 35 CD/DVD optionsPlay a music CD Select a particular track on a music CDPause playing a music CD Set repeat play On/Off on a music CDPlay the previous or next track on a music CD Resume playing a music CDStop and eject a music CD Select and play a video Video jukebox optionsYou can use the video jukebox options to Stop or restart a video Play a video in full screen modePause or resume playing a video Fast forward a videoPlay a different video Rewind a videoSet repeat play On/Off for a video To play a different videoPlay a DVD Play a DVD in full screen modeDVD options Show the DVD menuPlay the previous or next scene on a DVD Play or resume playing a DVDStop or restart a DVD Fast forward a DVDStop and eject a DVD Rewind a DVDTo rewind a DVD When you are finished, select Entertainment Change the automatic ejection setting for music CDsSet the volume levels for the entertainment applications Manage your Media LibrariesSet the location of the media library Select and play the Video Aux In source Video AuxWhat video formats are supported? Select the audio source for Video AuxPlay Video Aux In in full screen mode What types of camera are supported? View the camera in full screen modeCamera Add the camera to the networkRestore settings and information How to clean the touch screenHow to clean a display unit Maintain the NorthstarUpgrading the 8000i system Technical support, service and repairsFind the software version number Select Calibrate next to Calibrate Touch ScreenThere two types of upgrade for a 8000i processor Camera screen goes blank or camera isnt available TroubleshootingTouch screen is inaccurate Sounder Bottom is not displayedRadar shows random or grouped dots Radar overlay doesnt appear on the chart screenRadar shows random signals in center Radar shows different patterns on each sweep42.15 3D Chart photo overlays switch off Charts wont display42.14 3D Chart wont display photo overlays Radar shows false echoes and/or background noiseSelect Restore Global Settings Restore routes, tracks, and waypointsRestore global settings Select Routes Tracks and WaypointsGray screen with message Master name unavailable Restore local settingsSelect Restore Local Settings See Networking the 8000i for more informationGlossary An advanced home theatre sound Final waypoint in a routeType of fuel. See also gasoline and petrol Representation of a fish on the screen as a raw echo returnType of fuel Method of displaying information without using colourUnit of volume equal to 1.20094 US gallons Way of grouping music by style, e.g. Rock, ClassicalCamera attached to the mast Unit of volumeDisable the audio output List of options displayed on screenWaypoint that you are steering towards Chart is displayed with North at the top of the screenAdvance to the next track of the CD or DVD Play the selected track or tracksSee Range Charting Power output of the sonar transmissionRange and bearing between two points selected on the chart Set of software instructions for a computerSpeed at which the display moves across the screen Setting to display the track of the boat over the chartList of stored routes An area that cannot be reached by the sonar pulseList of tracks recorded and stored on the database Sudden change of temperature over a short vertical distanceUnit of volume equal to 0.833 Imperial gallons List of stored waypoints in the databaseArea of the display that is enlarged Portion of the display screen that shows the zoomed areaIndex 124 168 206 208 209 147 56, 71 211 212 Man Overboard Page United States Europe Northstar
Related manuals
Manual 45 pages 16.7 Kb

8000I specifications

The NorthStar Navigation 8000i is a sophisticated marine navigation solution designed to enhance the safety and efficiency of marine operations. Utilizing the latest technology and innovative features, the 8000i provides users with a comprehensive navigation tool that is both user-friendly and highly reliable.

At the heart of the NorthStar 8000i is its advanced GPS integration, which delivers precise positioning and navigation capabilities. The system supports multiple satellite systems, allowing for exceptional accuracy and reliability in determining a vessel's location, even in challenging conditions. The 8000i uses Differential GPS (DGPS) to further improve positional precision, making it suitable for commercial vessels and recreational boaters alike.

One of the standout features of the NorthStar 8000i is its large, high-resolution color display, which presents information in a clear and accessible manner. The screen offers customizable layouts, allowing users to prioritize the data they find most critical. The interface is designed with simplicity in mind, enabling users to access navigation tools, charts, and other features quickly and easily.

The NorthStar 8000i is equipped with advanced cartography options, including support for a variety of chart formats. Users can choose between vector and raster charts, ensuring that they can find the best option for their specific needs. The system also supports both local and regional data, providing an extensive coverage area for vessels operating in different waters.

In terms of connectivity, the 8000i features integrated networking capabilities, allowing it to interface seamlessly with other marine electronics such as radar systems, autopilots, and AIS transceivers. This interoperability enhances situational awareness and provides a comprehensive picture of the marine environment around the vessel.

The rugged design of the NorthStar 8000i ensures that it can withstand the challenging conditions often encountered at sea. Built to be weatherproof and durable, this navigation system is ready for any marine adventure.

To summarize, the NorthStar Navigation 8000i combines cutting-edge GPS technology with user-friendly designs and exceptional features, making it a top choice for navigators seeking reliable marine navigation solutions. With its accuracy, customizable interfaces, and robust construction, the 8000i is engineered to meet the diverse needs of modern sailors, whether for leisure or professional undertakings.
Top Page Image Contents