Manual No.
Series
10. Fixing the Number of Digits
Computer | Function | Bar Code |
|
Command | /Description | Command |
|
(Z7) | START/END | ,Z7, |
|
Programming Menu |
| ||
|
|
|
|
(H0) | Disable fixation | ,H0, | B |
|
|
| |
|
|
|
|
(H1) | Enable fixation | ,H1, |
|
|
|
| |
|
|
|
|
H2 | Disable 1 character | ,H2, | B |
Code 39 and Codabar | |||
| Disable 2 characters 2 of 5 |
|
|
|
|
|
|
H3 | Enable 1 character | ,H3, |
|
Code 39 and Codabar |
| ||
| Enable 2 characters 2 of 5 |
| |
|
|
|
|
To avoid truncation errors, the scanner can be programmed to only decode bar codes of one specific length, i.e., containing a specific number of digits. It is also possible to program the scanner to only decode bar codes of either of two specific *lengths.
To fix one (1) length (or number of digits) of | To fix two (2) different lengths of bar codes: | ||
bar code: | 1. | Scan “START” to enter the program- | |
|
| ||
1. | Scan “START” to enter the program- |
| ming mode |
| ming mode | 2. | Scan “Enable fixation” bar code |
2. | Scan “Enable fixation” bar code | 3. | Scan a sample bar code of the desired |
3. | Scan a sample bar code of the desired |
| length #1 |
| length | 4. | Scan a sample bar code of the desired |
4. | Repeat Step #3, |
| length #2 |
| sample bar code | 5. | Scan “STOP” to exit the programming |
5. | Scan “STOP” to exit the programming |
| mode |
|
|
|
|
“Fixing the Number of Digits” can only be applied to Code 39, Codabar, 2 or 5 and MSI/Plessey (UPC, Code 93 and Code 128 are not affected).
Page 31