INSTALL THE MIC IN A STANDALONE CONFIGURATION
In a standalone configuration, the MIC and OEM6 receiver are mounted separately.
Ref | Connector | Part Number | Mating Connector | Description | |
1 | P101 | Connects to the MIC power supply | |||
|
| (Molex) | (Molex) | (user supplied cable) | |
2 | P601 | Connects to HG1700, HG1900, HG1930 and | |||
|
| (Molex) | (Molex) | STIM300 IMUs (NovAtel supplied cable) | |
3 | P701 | Connects to ADIS IMUs | |||
|
| (Molex) | (Molex) | (NovAtel supplied cable) | |
4 | P301 | Connects the MIC serial port to the OEM6 receiver | |||
|
| (Molex) | (Molex) | (user supplied cable) | |
5 | J301 | N/A | This connector is not used in a standalone | ||
(Samtec) | configuration. | ||||
|
|
|
OEM628 Recommendations
•Use COM1 for connection to a computer. COM1 uses
•Use COM2 for connection to the MIC serial port. Both the MIC serial port and COM2 use LVTTL levels and can be connected without additional interface circuitry.
OEM638 Recommendations
•Use COM1 or COM2 for connection to a computer. COM1 and COM2 use
•Use COM3 for connection to the MIC serial port. This COM port and the MIC serial port use LVTTL levels and can be connected without additional interface circuitry.
6