IAC-F848
operating system from the devices in the sequence selected in these items. The settings are Floppy, LS/ZIP,
Boot Up Floppy Seek: The defaults setting is “Disabled”. When enabled, the BIOS will check whether there is a floppy disk drive installed.
Boot Up NumLock Status: The default setting is “On”. If it set “Off”, the cursor controls will function on the numeric keypad.
Typematic Rate Setting: The default setting is “Disabled”. If enabled, you can set the typematic rate and typematic delay.
Typematic Rate (Chars/Sec) : This setting controls the speed at which the system registers the repeated keystrokes. The choices range from 6 to 30 Chars/Sec. The default setting is “6” Chars/Sec.
Typematic Delay (M/Sec) : This setting controls the time between the display
of the first and second characters. There are four delay choices: 250ms, 500ms, 750ms and 1000ms. The default setting is “250” ms.
Security Option: This setting controls the password in the main screen. The options are “Setup” and “System”. Select “Setup” and it will protect the Setup Utility settings from being tampered with. Select “System” if you want to use password feature every time the system boots up. The default setting is “Setup”. You can create your password by using the “SUPERVISOR/USER PASSWORD” utility on the main program screen.
APIC Mode: Enable/Disable APIC Mode. The APIC provides multiprocessor support, more IRQs and faster interrupt handling.
MPS Version Control For OS: MPS 1.1 was the original specification. MPS version 1.4 adds extended configuration tables for improved support of multiple PCI bus configurations and greater expandability in the future. In addition, MPS 1.4 introduces support for a secondary PCI bus without requiring a PCI bridge.
Full Screen Logo show: Enable/Disable display the
24