Lanner electronic IAC-F848 manual

Page 31

IAC-F848

DPMS: Allows the BIOS to control the video display card if it supports the DPMS feature.

Video Off in suspend : Enable/Disable Video Off in suspend.

Suspend Type: To select suspend type as “Stop Grant” or “PwrOn Suspend”.

MODEM Use IRQ : Name the interrupt request (IRQ) line assigned to the modem (if any) on your system. Activity of the selected IRQ always awakens the system.

Suspend Mode: This field specifies the length of time of system inactivity while in full power on state before the computer enters suspend mode and motivates the enable 'Wake Up Events In Doze & Standby' / 'PM Events'.

HDD Power down: When enable and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active.

Soft-Off by PWRBTN: This field defines the power off mode when using an ATX power supply.

Instant Off: Allows power off immediately upon pressing the power button.

Delay 4 sec: the system powers off when the power button is pressed for more than four seconds or enters the suspend mode when pressed for less than four seconds.

Wake-Up by PCI card: Enable/Disable PCI PME wake up function.

Power On By Ring: Enable/Disable Power On By Ring function.

USB KB Wake-Up From S3: Enable/Disable wakeup by USB KB function.

Resume By Alarm: This field enables the user to set the option to enable an RTC Alarm (real time clock) to wake up the computer system from power saving mode. When this option is enabled another field allowing the user to set the alarm time on, appears. The additional field has options for date, hour, minute and second.

PWRON After PWR-Fail:When power fail, you can select power ON or Off or Former status.

Reload Global Timer Events: When any of these options are enabled or set to on, they enable event monitoring on the specified hardware IRQ when the computer is in power saving mode. The computer enters the full power on state if any activity occurs. Those event include LPT , COM, HDD , FDD ,PCI IRQ…etc.

Primary IDE 0: Enable/Disable this one of Reload Global Timer Events.

Primary IDE 1: Enable/Disable this one of Reload Global Timer Events.

Secondary IDE 0: Enable/Disable this one of Reload Global Timer Events.

Secondary IDE 1: Enable/Disable this one of Reload Global Timer Events.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents
IAC-F848 Manual IAC-F848 Manual Follow these guidelines to ensure general safety Safety GuidelinesEMC Notice Contents RMA Service Requesting a RMA# RMA Service Request Form Product Overview Features and BenefitsProduct Introduction Feature Description SpecificationsTechnical Assistance Package ContentsIAC-F848 Images System ComponentsBoard Layout COMA1 Pin header Dimensions mmSettings and I/O Connectors CCMOS2 Clear Cmos DataUSB F1-F4：USB Port #1-#4 FDC A1 Floppy Interface Connector 34 Pin HeaderLPT A1：Parallel Connector 26 Pin 2.54mm Pitch Header FPIO1 4-Pin Power and Reset FunctionATX C1 For ATX Function IDE1 IDE Interface Connector IRDA1 IRDA1 ConnectorCPU FAN1 4 Pin FAN Connector VGA1 External VGA Connector 12 Pin HeaderPCI B1 Mini PCI Connector CN1 Compact Flash ConnectorSATA1-SATA4 Sata Connector IAC-F848 Cmos Setup Utility Bios SetupRunning Award Bios Entering SetupMain Program Screen Standard Cmos Setup Screen Standard Cmos Setup Landing Zone Landing Zone Bios Features Setup Screen Bios Features SetupIAC-F848 IAC-F848 Chipset Features Setup Screen Chipset Features SetupIAC-F848 Integrated Peripherals Integrated Peripherals Setup Screen On-Chip IDE DeviceOn Board Device Power Management Setup Screen Power Management SetupSuper IO Device IAC-F848 IAC-F848 PnP/PCI Configuration Setup Screen PNP/PCI ConfigurationPC Health Status SET Supervisor / User Password Load Optimized DefaultsIAC-F848 Exit Without Saving Save & Exit SetupRequesting a RMA# Warranty PolicyRMA Service Terms and ConditionsRMA No RMA Service Request Form
Related manuals
Manual 38 pages 57.9 Kb