Preparing for the Installation

SuperLoader™ 3A Series Quick Start Guide

Choose a location that meets the following criteria:

Criteria	Description

Rack requirements	Standard 19-inch rack

Room temperature	10–35° C (50–95° F)

Power source	AC power voltage: 100–127 VAC; 200–240 VAC
	Line frequency: 50–60 Hz
	Locate the AC outlet near the autoloader. The AC power
	cable is the product’s main disconnect device and must be
	easily accessible at all times.

Weight	15.5 kg (34 lb.) unloaded
	18.6 kg (41 lb.) loaded with 2 magazines, 16 cartridges

Air Quality	Minimize sources of particulate contamination. Avoid areas
	near frequently used doors and walkways, cooling or exhaust
	vents, stacks of supplies that collect dust, printers, and
	smoke-filled rooms.
	Excessive dust and debris can damage tapes and tape drives.

Humidity	20–80% RH (non-condensing)

Clearance	Back: Minimum of 43.2 cm (17 in.)
	Front: Minimum of 68.6 cm (27 in.)
	Sides: Minimum of 5.08 cm (2 in.)

Before you begin the installation procedure in this section, make the following preparations as described in this section:

•Providing Necessary Tools

•Taking ESD Precautions

•Preparing for Rack Mounting

Providing Necessary Tools Provide the following tools for unpacking and installing the autoloader:

•#2 Phillips screwdriver

•Level

•Antistatic wrist strap

2	Preparing for the Installation