Checking Accessories

Figure 1 Rack Mount Hardware

The following accessories are shipped with the SuperLoader 3A Series autoloader:

•Ethernet cable

•Hardware to rack mount the autoloader (see figure 1)

•Four autoloader brackets (two long and two short to accommodate different rack depths)

•Two support brackets

•Two sets (decimal and metric) of four support bracket 10-32 x 1/4 inch button head screws (two per support bracket)

•TORX® L-Key drivers (T8 and T10)

•Power cable

•Documentation CD containing all of the documentation in Adobe® Portable Document Format (PDF)

•Bar code labels

You will also need the following parts that were shipped with your rack:

•Eight clip nuts

•Eight rack screws

Support brackets (74-60605-01)

Short autoloader brackets (72-A225-A)

Long autoloader brackets (72-A226-A)

Support bracket screws

72-A348-A (4) or 90-60227-50 (4)

Unpacking the Autoloader