KMA16R

1 6 W A T T R E V E R B

K E Y B O A R D / M I X E R A M P L I F I E R

1.) Mic/Line Input Jack 1 - this is a 1/4” 2 conductor input jack for plugging in your instrument. It is intended for keyboards or Hi-Z microphones but will accept other instruments as well.

2.) Mic/Line Input Jack 2 - this is a 1/4” 2 conductor input jack for plugging in your instrument. It is intended for keyboards or Hi-Z microphones but will accept other instruments as well.

3.) Volume 1 - this control is the output volume control for the Input #1. Slowly increase the control to increase the volume. If you are using a keyboard with a preamp, set it’s level for a mid position before increasing this control otherwise distortion may occur. Both inputs follow the same tone circuit as the other input.

4.) Volume 2 - this control is the output volume control for the Input #2. Slowly increase the control to increase the volume. If you are using a high impedance microphone, be careful when increasing the volume. Depending on mic position, it may feedback if mic is in front of speaker. Both inputs follow the same tone circuit as the other input.

5.) Low - this control is the bass control. It is active and set to boost or cut frequencies at 55 Hz. This will effect the low frequency signals. Turning it fully clockwise, the signal is boosted 18 db. Turning it counterclockwise, the low will be rolled off -18db. Especially good for “cleaning up” preset patches or making thin patches sound fuller.

6.) Lo Mid - this control is the Low Midrange control. It is active and set to boost or cut frequencies at 350 Hz. This will effect the mid-low frequency signals. Turning it fully clockwise, the signal is boosted 12 db. Turning it counterclockwise, the low-mids will be rolled off -12db. Especially good for “cleaning up” preset patches.

7.) Hi Mid - this control is the High Midrange control. It is active and set to boost or cut frequencies at 2.5KHz. This will effect the mid-high frequency signals. Turning it fully clockwise, the signal is boosted 12 db. Turning it counterclockwise, the low-mids will be rolled off -12db. Increasing this will add punch to keyboard patches or vocal presence.

8.) High - this is the high frequency tone control. It is active and set to boost or cut frequencies at 8KHz. This will effect the high frequency signals. Turning it fully clockwise, the signal is boosted 18 db. Turning it counterclockwise, the low-mids will be rolled off -18db. This will add or subtract the high end shimmer and clarity.

9.) Reverb Level - (only on the KMA16R). This control adds the spring reverb and mixes it into the main signal buss. Reverberation creates a trail like effect with the sound. It lets the notes “hang in the air” longer, extending the sound.

10.) Headphone Jack - this is a 1/4” 3 conductor jack for plugging headphones. It will sum the signal and put the sound in both ears, thereby creating a pseudo-stereo sound. Volume will be determined by the volume control on the channel you are on. It will disconnect the internal speaker when plugged in. This will allow quiet practicing.

11.) Jewel Light - this jewel light lets you know that the amplifier is on.

12.) Power - this switch turns on and off the AC power to the amp.

Back Panel - this is a 2 conductor 1/4” speaker output jack. This will disconnect the internal speaker and allow an external speaker cabinet to be employed. Rating is 8 ohms.

KMA16/16R specifications

The Kustom KMA16/16R is an innovative portable amplifier designed for musicians and audio professionals who demand high fidelity and versatility in their equipment. This compact and lightweight unit offers a robust set of features that make it suitable for various applications, from solo performances to small band engagements.

One of the standout features of the KMA16/16R is its impressive 16-channel capability. This allows for an extensive range of audio input options, enabling users to connect multiple instruments and microphones simultaneously. Each channel is equipped with individual volume controls, EQ settings, and effects, giving users complete command over their sound mix and the ability to tailor it to their unique preferences.

The KMA16/16R utilizes advanced digital signal processing technology to enhance audio clarity and reduce unwanted noise. Its built-in effects include reverb and delay, allowing musicians to add depth and ambiance to their performances without needing external effects units. This is particularly beneficial for live sound applications, where simplicity and reliability are paramount.

In terms of connectivity, the KMA16/16R is equipped with a variety of input options, including XLR, 1/4-inch instrument jacks, and AUX inputs. This versatility ensures compatibility with different audio sources, whether it’s a guitar, keyboard, or vocal microphone. Moreover, the amplifier features Bluetooth connectivity, enabling users to stream music directly from their devices, making it an excellent choice for backing tracks or practice sessions.

The durable construction of the KMA16/16R ensures it can withstand the rigors of live performances and frequent transportation. Its lightweight design further adds to its portability, making it easy to set up and break down at gigs or rehearsals. Musicians will appreciate the thoughtful layout and intuitive controls, which allow for quick adjustments during performances.

Additionally, the KMA16/16R includes a headphone output for silent practice, making it a highly versatile tool for musicians who want to hone their skills or compose in peace. The combination of high-quality performance, flexible connectivity, and user-friendly design makes the Kustom KMA16/16R an ideal choice for aspiring musicians, seasoned performers, and audio professionals alike. Its exceptional feature set ensures that it can meet diverse audio needs and deliver impressive results in any setting.