Controls and Connectors, Power Mounting | Lexicon Converter instruction

20/20 AD User Guide

Controls and Connectors

After unpacking the 20/20 AD, save all packing materials in case you ever need Unpacking to ship the unit. Thoroughly inspect the 20/20 AD and packing materials for signs

of damage. Report any shipment damage to the carrier at once. The following accessories are included with the 20/20 AD:

1.Power Cable

2.User Guide

3.Quick Reference Guide

The 20/20 AD is equipped with a 3-pin IEC connector and detachable line cord. Connect the cable end of the 20/20 AD line cord to the 20/20 AD power connector. Then plug the line cord into an AC wall socket providing voltage corresponding to the data plate on the unit.

The 20/20 AD measures 19"W x 1.75"H x 13.9"D (483 x 45 x 353 mm). Make sure that the 20/20 AD is securely screwed into the rack, and that support is provided for the rear of the chassis during transport to avoid possible damage from severe mechanical shock.

The maximum ambient operating temperature is 95° F (35° C). Provide adequate ventilation if the 20/20 AD is mounted in a closed rack with heat-producing equipment.